Download New Latest (May) Cisco 642-747 Actual Tests 11-20

By | May 17, 2015

Ensurepass

 

QUESTION 11

Which two are supported operating systems for installation of Cisco WCS v7.0? (Choose two.)

 

A.

Windows Server 2003 – 32 bit

B.

Windows Server 2003 – 64 bit

C.

Windows Server 2008 – 32 bit

D.

Windows Server 2008 – 64 bit

E.

Windows 7 Professional or above – 32 bit

F.

Windows 7 Professional or above – 64 bit

G.

Red Hat Linux Enterprise Server 5.X – 32 bit

H.

Red Hat Linux Enterprise Server 5.X – 64 bit

 

Answer: AG

 

 

QUESTION 12

Which two descriptions are examples of how location services can be adjusted at the Cisco WLC v7.0? (Choose two.)

 

A.

Disable RFID tag tracking if there are no tags in the respective locations of the controller APs.

B.

Disable wireless client tracking if there are no requirements for the respective locations of the controller APs.

C.

Increase RFID timeouts from defaults if tags are beaconing at 30 seconds.

D.

Decrease RFID timeouts from defaults if tags are beaconing at 30 seconds.

 

Answer: AD

 

 

QUESTION 13

Which two statements correctly describe integrating AeroScout TDoA receivers (sensors) into a Cisco Unified Wireless Network based on v7.0? (Choose two.)

 

A.

Cisco WCS configures the TDoA receivers through CLI templates.

B.

AeroScout software is required to configure TDoA receivers.

C.

Cisco WCS can add TDoA receivers to equipment lists but not in floor maps.

D.

Cisco WCS can add TDoA receivers to floor maps but without heat maps.

E.

Cisco WCS can add TDoA receivers to floor maps with nondynamic heat maps.

F.

Cisco WCS can add TDoA receivers to floor maps with dynamic heat maps.

 

Answer: BD

 

 

QUESTION 14

The Cisco 3300 Series MSE v7.0 receives three RSSI measurements that are higher than – 75 dBm for a given device and multiple measurements that are lower than -75 dBm. How does Cisco MSE perform the location calculation?

 

A.

Cisco MSE uses all the RSSI values that are received.

B.

Cisco MSE uses only the RSSI values that are higher than -75 dBm.

C.

Cisco MSE uses the three RSSI values that are higher than -75 dBm and the best RSSI that is lower than -75 dBm.

D.

Cisco MSE uses the three RSSI values that are higher than -75 dBm and the average of the RSSI values that are lower than -75 dBm.

E.

Cisco MSE takes in all the RSSI values for a given device and averages all the values.

 

Answer: C

 

 

QUESTION 15

Which ports would require unrestricted port access for CleanAir RF spectrum analysis between the AP and Cisco Spectrum Expert?

 

A.

UDP 5246 and 5247

B.

TCP 5246 and 5247

C.

UDP 16113 and 16114

D.

TCP 16113 and 16114

E.

TCP 37540 and 37550

F.

UDP 37540 and 37550

 

Answer: E

 

 

QUESTION 16

Which access points can be deployed with wireless mesh using version 7.0.116.0 software?

 

A.

outdoor Cisco 1500 Series APs only

B.

outdoor and indoor APs that are not capable of 802.11n or CleanAir

C.

outdoor and indoor APs that are capable of 802.11n but not CleanAir

D.

outdoor and indoor APs that are capable of 802.11n and CleanAir

 

Answer: D

 

 

QUESTION 17

Which component of a Cisco wireless mesh network ensures maximum network availability?

 

A.

Cisco WLC

B.

CAPWAP

C.

Cisco 3300 Series MSE

D.

AWPP

E.

Cisco WCS

 

Answer: D

 

 

QUESTION 18

Refer to the exhibit.

 

clip_image001

 

What does the count of 62 for Handoff Requests Ignored represent in the Mobility Statistics output?

 

A.

the number of handoff requests that were denied because the handoff period was too short (3 seconds)

B.

the number of handoff requests or client announcements that were ignored because the controller had no knowledge of that client

C.

the number of anchor requests that were ignored because the session closed on the current anchor and transferred the anchor back to the requestor

D.

the number of handoff responses that were denied

 

Answer: B

 

 

QUESTION 19

How often is the Cisco WCS v7.0 map updated regarding mesh information?

 

A.

30 seconds

B.

90 seconds

C.

5 minutes

D.

15 minutes

E.

20 minutes

 

Answer: D

 

 

QUESTION 20

Which option should be the RSSI (dBm) cell edge for a site survey for a wireless network of data, voice, and location services?

 

A.

-65

B.

-67

C.

-72

D.

-75

E.

-80

 

Answer: B

 

Free VCE & PDF File for Cisco 642-747 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …