Download New Updated (Spring 2015) Cisco 100-101 Actual Tests 121-130

By | April 22, 2015

Ensurepass

 

QUESTION 121

The ip subnet zero command is not configured on a router. What would be the IP address of Ethernet0/0 using the first available address from the sixth subnet of the network 192.168.8.0/29?

 

A.        192.168.8.25

B.        192.168.8.41

C.        192.168.8.49

D.        192.168.8.113

 

Correct Answer: C

 

 

QUESTION 122

For the network 192.0.2.0/23, which option is a valid IP address that can be assigned to a host?

 

A.        192.0.2.0

B.        192.0.2.255

C.        192.0.3.255

D.        192.0.4.0

 

Correct Answer: B

 

 

QUESTION 123

How many addresses for hosts will the network 124.12.4.0/22 provide?

 

A.        510

B.        1022

C.        1024

D.        2048

 

Correct Answer: B

 

 

 

 

QUESTION 124

The network default gateway applying to a host by DHCP is 192.168.5.33/28. Which option is the valid IP address of this host?

 

A.        192.168.5.55

B.        192.168.5.47

C.        192.168.5.40

D.        192.168.5.32

E.         192.168.5.14

 

Correct Answer: C

 

 

QUESTION 125

Which two addresses can be assigned to a host with a subnet mask of 255.255.254.0?

(Choose Two.)

 

A.        113.10.4.0

B.        186.54.3.0

C.        175.33.3.255

D.        26.35.2.255

E.         17.35.36.0

 

Correct Answer: BD

 

 

QUESTION 126

The network administrator has asked you to check the status of the workstation’s IP stack by pinging the loopback address. Which address would you ping to perform this task?

 

A.        10.1.1.1

B.        127.0.0.1

C.        192.168.0.1

D.        239.1.1.1

 

Correct Answer: B

 

 

QUESTION 127

Workstation A has been assigned an IP address of 192.0.2.24/28. Workstation B has been assign
ed an IP address of 192.0.2.100/28. The two workstations are connected with a straight-through cable. Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? (Choose Two.)

 

A.       Replace the straight-through cable with a crossover cable.

B.       Change the subnet mask of the hosts to /25.

C.       Change the subnet mask of the hosts to /26.

D.       Change the address of Workstation A to 192.0.2.15.

E.        Change the address of Workstation B to 192.0.2.111.

 

Correct Answer: AB

 

 

 

QUESTION 128

Refer to the exhibit. According to the routing table, where will the router send a packet destined for 10.1.5.65?

 

clip_image001

 

A.        10.1.1.2

B.        10.1.2.2

C.        10.1.3.3

D.        10.1.4.4

 

Correct Answer: C

 

 

QUESTION 129

Refer to the exhibit. Which value will be configured for Default Gateway of the Local Area

Connection?

clip_image003

A.        10.0.0.0

B.        10.0.0.254

C.        192.223.129.0

D.        192.223.129.254

 

Correct Answer: B

 

 

QUESTION 130

Refer to the exhibit. The user at Workstation B reports that Server A cannot be reached. What is preventing Workstation B from reaching Server A?

 

clip_image005

 

A.       The IP address for Server A is a broadcast address.

B.       The IP address for Workstation B is a subnet address.

C.       The gateway for Workstation B is not on the same subnet.

D.       The gateway for Server A is not on the same subnet.

 

Correct Answer: D

Free VCE & PDF File for Cisco 100-101 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …