Download New Updated (Spring 2015) Cisco 200-101 Actual Tests 21-30

By | April 22, 2015

Ensurepass

 

QUESTION 21

Refer to the exhibit. RTA is configured with a basic configuration. The link between the two routers is operational and no routing protocols are configured on either router. The line shown in the exhibit is then added to router RTA. Should interface Fa0/0 on router RTB shut down, what effect will the shutdown have on router RTA?

 

clip_image002

 

A.      A route to 172.16.14.0/24 will remain in the RTA routing table.

B.      A packet to host 172.16.14.225 will be dropped by router RTA.

C.      Router RTA will send an ICMP packet to attempt to verify the route.

D.      Because router RTB will send a poison reverse packet to router RTA, RTA will remove the route.

 

Correct Answer: A

 

 

QUESTION 22

What can be done to secure the virtual terminal interfaces on a router? (Choose two.)

 

A.      Administratively shut down the interface.

B.      Physically secure the interface.

C.      Create an access list and apply it to the virtual terminal interfaces with the access-group command.

D.      Configure a virtual terminal password and login process.

E.       Enter an access list and apply it to the virtual terminal interfaces using the access-class command.

 

Correct Answer: DE

 

 

 

 

 

 

 

QUESTION 23

Refer to the exhibit. Based on the exhibited routing table, how will packets from a host within the 192.168.10.192/26 LAN be forwarded to 192.168.10.1?

 

clip_image004

 

A.      The router will forward packets from R3 to R2 to R1.

B.      The router will forward packets from R3 to R1 to R2.

C.      The router will forward packets from R3 to R2 to R1 AND from R3 to R1.

D.      The router will forward packets from R3 to R1.

 

Correct Answer: C

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 24

Refer to the exhibit. What information about the interfaces on the Main_Campus router is true?

 

clip_image006

 

A.      The LAN interfaces are configured on different subnets.

B.      Interface FastEthernet 0/0 is configured as a trunk.

C.      The Layer 2 protocol of interface Serial 0/1 is NOT operational.

D.      The router is a modular router with five FastEthernet interfaces.

E.       Interface FastEthernet 0/0 is administratively deactivated.

 

Correct Answer: B

 

 

QUESTION 25

Refer to the exhibit. C-router is to be used as a “router-on-a-stick” to route between the VLANs. All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway. What is true about this configuration?

 

clip_image008

A.      These commands need to be added to the configuration:

C-router(config)# router eigrp 123

C-router(config-router)# network 172.19.0.0

 

B.      These commands need to be added to the configuration:

C-router(config)# router ospf 1

C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0

 

C.      These commands need to be added to the configuration:

C-router(config)# router rip

C-router(config-router)# network 172.19.0.0

 

D.      No further routing configuration is required.

 

Correct Answer: D

 

 

QUESTION 26

Refer to the exhibit. Assume that all router interfaces are operational and correctly configured. In addition, assume that OSPF has been correctly configured on router R2. How will the default route configured on R1 affect the operation of R2?

 

clip_image010

 

A.      Any packet destined for a network that is not directly connected to router R1 will be dropped.

B.      Any packet destined for a network that is not directly connected to router R2 will be dropped immediately.

C.      Any packet destined for a network that is not directly connected to router R2 will be dropped immediately because of the lack of a gateway on R1.

D.      The networks directly connected to router R2 will not be able to communicate with the 172.16.100.0, 172.16.100.128, and 172.16.100.64 subnetworks.

E.       Any packet destined for a network that is not referenced in the routing table of router R2 will be directed to R1. R1 will then send that packet back to R2 and a routing loop will occur.

 

Correct Answer: E

 

 

QUESTION 27

Refer to the exhibit. Assume that all of the router interfaces are operational and configured correctly. How will router R2 be affected by the configuration of R1 that is shown in the exhibit?

 

clip_image012

 

A.      Router R2 will not form a neighbor relationship with R1.

B.      Router R2 will obtain a full routing table, including a default route, from R1.

C.      R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.

D.      R2 will not have a route for the directly connected serial network, but all other directly connected networks will be present, as well as the two Ethernet networks connected to R1.

 

Correct Answer: A

 

 

QUESTION 28

The internetwork infrastructure of company XYZ consists of a single OSPF area as shown in the graphic. There is concern that a lack of router resources is impeding internetwork performance. As part of examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the default and the router IDs are shown with each router. Which routers are likely to have been elected as DR? (Choose two.)

 

clip_image013

 

A.      Corp-1

B.      Corp-2

C.      Corp-3

D.      Corp-4

E.       Branch-1

F.       Branch-2

 

Correct Answer: DF

 

 

QUESTION 29

What are three characteristics of the OSPF routing protocol? (Choose three.)

 

A.      It converges quickly.

B.      OSPF is a classful routing protocol.

C.      It uses cost to determine the best route.

D.      It uses the DUAL algorithm to determine the best route.

E.       OSPF routers send the complete routing table to all directly attached routers.

F.       OSPF routers discover neighbors before exchanging routing information.

 

Correct Answer: ACF

 

 

QUESTION 30

Which statement is true, as relates to classful or classless routing?

 

A.      Classful routing protocols send the subnet mask in routing updates.

B.      RIPv1 and OSPF are classless routing protocols.

C.      Automatic summarization at classful boundaries can cause problems on discontiguous subnets.

D.      EIGRP and OSPF are classful routing protocols and summarize routes by default.

 

Correct Answer: C

 

Free VCE & PDF File for Cisco 200-101 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …