Download New Updated (Spring 2015) Cisco 200-101 Actual Tests 61-70

By | April 22, 2015

Ensurepass

 

QUESTION 61

clip_image002

clip_image004

 

OSPF is configured using default classful addressing. With all routers and interfaces operational, how many networks will be in the routing table of R1 that are indicated to be learned by OSPF?

 

A.      2

B.      3

C.      4

D.      5

E.       6

F.       7

 

Correct Answer: C

 

 

QUESTION 62

clip_image002[1]

clip_image006

 

 

After the network has converged, what type of messaging, if any, occurs between R3 and R4?

 

A.      No messages are exchanged.

B.      Hellos are sent every 10 seconds.

C.      The full database from each router is sent every 30 seconds.

D.      The routing table from each router is sent every 60 seconds.

 

Correct Answer: B

 

 

QUESTION 63

clip_image008

clip_image010

 

To allow or prevent load balancing to network 172.16.3.0/24, which of the following commands could be used in R2? (Choose two.)

 

A.      R2(config-if)#clock rate

B.      R2(config-if)#bandwidth

C.      R2(config-if)#ip ospf cost

D.      R2(config-if)#ip ospf priority

E.       R2(config-router)#distance ospf

 

Correct Answer: BC

 

 

QUESTION 64

clip_image008[1]

clip_image012

 

R1 is configured with the default configuration of OSPF. From the following list of IP addresses configured on R1, which address will the OSPF process select as the router ID?

 

A.      192.168.0.1

B.      172.16.1.1

C.      172.16.2.1

D.      172.16.2.225

 

Correct Answer: A

 

 

QUESTION 65

clip_image014

clip_image016

clip_image017

 

If required, what password should be configured on the DeepSouth router in the branch office to allow a connection to be established with the MidEast router?

 

A.      No password is required.

B.      Enable

C.      Secret

D.      Telnet

E.       Console

 

Correct Answer: B

 

 

QUESTION 66

clip_image014[1]

clip_image016[1]

clip_image017[1]

 

What would be the destination Layer 2 address in the frame header for a frame that is being forwarded by Dubai to the host address of 172.30.4.4?

 

A.      825

B.      230

C.      694

D.      387

 

Correct Answer: C

 

 

 

QUESTION 67

clip_image014[2]

clip_image016[2]

clip_image017[2]

 

Which connection uses the default encapsulation for serial interfaces on Cisco routers?

 

A.      The serial connection to the NorthCoast branch office.

B.      The serial connection to the North branch office.

C.      The serial connection to the Southlands branch office.

D.      The serial connection to the Multinational Core.

 

Correct Answer: B

 

 

 

 

QUESTION 68

clip_image014[3]

clip_image016[3]

clip_image017[3]

 

A static map to the S-AMER location is required. Which command should be used to create this map?

 

A.      frame-relay map ip 172.30.0.3 825 broadcast

B.      frame-relay map ip 172.30.0.3 230 broadcast

C.      frame-relay map ip 172.30.0.3 694 broadcast

D.      frame-relay map ip 172.30.0.3 387 broadcast

 

Correct Answer: B

 

 

 

QUESTION 69

clip_image019

 

Correct Answer:

clip_image021

 

 

QUESTION 70

Which two options are valid WAN connectivity methods? (Choose two.)

 

A.      PPP

B.      WAP

C.      DSL

D.      L2TPv3

E.       Ethernet

 

Correct Answer: AC

Free VCE & PDF File for Cisco 200-101 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …