Download New Updated (Spring 2015) Cisco 300-135 Actual Tests 21-30

By | April 22, 2015

Ensurepass

 

QUESTION 21

The following commands are issued on a Cisco Router:

 

Router(configuration)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1

Router(configuration)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1

Router(configuration)#exit

Router#debug ip packet 199

 

What will the debug output on the console show?

 

A.

All IP packets passing through the router

B.

Only IP packets with the source address of 10.1.1.1

C.

All IP packets from 10.1.1.1 to 172.16.1.1

D.

All IP Packets between 10.1.1.1 and 172.16.1.1

 

Correct Answer: D

 

 

QUESTION 22

What level of logging is enabled on a Router where the following logs are seen?

 

%LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

 

A.

alerts

B.

critical

C.

errors

D.

notifications

 

Correct Answer: D

 

 

QUESTION 23

You have the followings commands on your Cisco Router:

 

ip ftp username admin

ip ftp password backup

 

You have been asked to switch from FTP to HTTP. Which two commands will you use to replace the existing commands?

 

A.

ip http username admin

B.

ip http client username admin

C.

ip http password backup

D.

ip http client password backup

E.

ip http server username admin

F.

ip http server password backup

 

Correct Answer: BD

 

 

QUESTION 24

You have 2 NTP servers in your network – 10.1.1.1 and 10.1.1.2. You want to configure a Cisco router to use 10.1.1.2 as its NTP server before falling back to 10.1.1.1. Which commands will you use to configure the router?

 

A.

ntp server 10.1.1.1

ntp server 10.1.1.2

B.

ntp server 10.1.1.1

ntp server 10.1.1.2 primary

C.

ntp server 10.1.1.1

ntp server 10.1.1.2 prefer

D.

ntp server 10.1.1.1 fallback

ntp server 10.1.1.2

 

Correct Answer: C

 

 

QUESTION 25

The following command is issued on a Cisco Router:

 

Router(configuration)#logging console warnings

 

Which alerts will be seen on the console?

 

A.

Warnings only

B.

debugging, informational, notifications, warnings

C.

warnings, errors, critical, alerts, emergencies

D.

notifications, warnings, errors

E.

warnings, errors, critical, alerts

 

Correct Answer: C

 

 

QUESTION 26

Which two of the following options are categories of Network Maintenance tasks?

 

A.

Firefighting

B.

Interrupt-driven

C.

Policy-based

D.

Structured

E.

Foundational

 

Correct Answer: BD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 27

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems. PC2 in VLAN 200 is unable to ping the gateway address 172.16.200.1; identify the issue.

 

clip_image002

clip_image004

clip_image006

clip_image008

clip_image010

 

A.

VTP domain name mismatch on SW4

B.

VLAN 200 not configured on SW1

C.

VLAN 200 not configured on SW2

D.

VLAN 200 not configured on SW4

 

Correct Answer: C

Explanation:

By looking at the configuration for SW2, we see that it is missing VLAN 200, and the “switchport access vlan 200” command is missing under interface eth 0/0:

 

clip_image012

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 28

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems. Which of statement is true regarding STP issue identified with switches in the given topology?

 

clip_image013

clip_image014

clip_image015

clip_image016

clip_image017

 

A.

Loopguard configured on the New_Switch places the ports in loop inconsistent state

B.

Rootguard configured on SW1 places the ports
in root inconsistent state

C.

Bpduguard configured on the New_Switch places the access ports in error-disable

D.

Rootguard configured on SW2 places the ports in root inconsistent state

 

Correct Answer: A

Explanation:

On the new switch, we see that loopguard has been configured with the “spanning-tree guard loop” command.

 

clip_image018

 

The loop guard feature makes additional checks. If BPDUs are not received on a non-designated port, and loop guard is enabled, that port is moved into the STP loop-inconsistent blocking state, instead of the listening / learning / forwarding state. Without the loop guard feature, the port assumes the designated port role. The port moves to the STP forwarding state and creates a loop.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 29

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems. You have configured PVST+ load balancing between SW1 and the New_Switch in such a way that both the links E2/2 and E2/3 are utilized for traffic flow, which component of the configuration is preventing PVST+ load balancing between SW1 and SW2 links?

 

clip_image013[1]

clip_image014[1]

clip_image015[1]

clip_image016[1]

clip_image017[1]

 

A.

Port priority configuration on SW1

B.

Port priority configuration on the New_Switch

C.

Path cost configuration on SW1

D.

Path cost configuration on the New_Switch

 

Correct Answer: D

Explanation:

Here is the configuration found on the New_Switch:

 

clip_image019

 

This causes the port cost for link eth 1/3 to increase the path cost to 250 for all VLANs, making that link less preferred so that only eth 1/2 will be used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 30

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems. Refer to the topology. SW1 Switch Management IP address is not pingable from SW4. What could be the issue?

 

clip_image013[2]

clip_image014[2]

clip_image015[2]

clip_image016[2]

clip_image017[2]

 

A.

Management VLAN not allowed in the trunk links between SW1 and SW4

B.

Management VLAN not allowed in the trunk links between SW1 and SW2

C.

Management VLAN not allowed in the trunk link between SW2 and SW4

D.

Management VLAN ip address on SW4 is configured in wrong subnet

E.

Management VLAN interface is shutdown on SW4

 

Correct Answer: D

Explanation:

In the network, VLAN 300 is called the Management VLAN. Based on the configurations shown below, SW1 has VLAN 300 configured with the IP address of 192.168.10.1/24, while on SW4 VLAN 300 has an IP address of 192.168.100.4/24, which is not in the same subnet.

 

clip_image021

Free VCE & PDF File for Cisco 300-135 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …