Download New Updated (Spring 2015) Cisco 350-001 Actual Tests 191-200

By | April 22, 2015

Ensurepass

 

QUESTION 191

Refer to the exhibit. Which two statements are correct, when the QoS configuration is applied in an outbound direction on a 10- Mb/s interface? (Choose two.)

 

clip_image001

 

A.       When reaching 10 Mb/s of input rate, the video class will be policed to 200 kb/s.

B.       The class FTP is allowed to reach more than 1 Mb/s in the event of congestion.

C.       IP precedence 1 traffic is affected by a drop probability.

D.      Video traffic above 200 kb/s is allowed to pass when the total interface output rate does not reach 10 Mb/s.

E.       Video traffic above 200 kb/s is allowed to pass when congestion is present.

 

Correct Answer: BD

 

 

QUESTION 192

Refer to the exhibit. A user with IP address 10.10.10.200 fails to telnet to a switch with IP address 10.10.20.2. What is the c
ause of the issue?

 

clip_image003

 

A.       The switch is not configured with a default gateway.

B.       The HTTP server is not enabled on the switch.

C.       STP is blocking the connection from switch to router.

D.      IP routing is enabled on the switch, but no route pointing back to the client is configured.

E.       The switch is configured with an IP address from the wrong subnet.

 

Correct Answer: D

 

 

QUESTION 193

Refer to the exhibit. Router RTB is performing one-way redistribution from RIP to OSPF. Which outgoing interface will router RTD choose for packets to the 192.168.0.0/24 network, and why?

 

clip_image004< /span>

A.       Fa0/1, because OSPF is a link-state routing protocol

B.       Fa0/0, because RIP is a distance vector protocol

C.       Fa0/0, because RIP has a higher administrative distance

D.      Fa0/0, because OSPF has a lower administrative distance

E.       Fa0/1, because OSPF has a lower administrative distance

F.        Fa0/1, because RIP has a lower administrative distance

 

Correct Answer: D

 

 

QUESTION 194

Refer to the exhibit. You have performed multiple changes to your OSPF configuration. After these changes, you receive a lot of calls from users in OSPF area 2 complaining about application performance issues when they access servers connected to area 3. When you check the routing table of router RTC, you notice that packets to network 10.3.3.0/24 are sent out via the slower path out of the Fa0/0 interface. What can you do to solve this issue?

 

clip_image006

 

A.       Change the OSPF configuration in OSPF area 1 to OSPF area 0

B.       Change the OSPF configuration in OSPF area 0 to OSPF area 1

C.       Change the OSPF configuration in OSPF area 2 to OSPF area 3

D.      Change the OSPF configuration in OSPF area 3 to OSPF area 1

 

Correct Answer: A

 

 

QUESTION 195

Refer to the exhibit. You get reports that Windows users cannot log in anymore when the main MPLS link is down. The message that users receive is, “There are currently no login servers available to service the login request.” However, if you modify the MTU of the client machine to 1294, the user can log in. What would be a reliable fix for this issue?

 

clip_image007

 

A.       add “ip tcp mss-adjust 1254” to se1/0/0

B.       add “ip tcp
mss-adjust 1254” to se1/0/0 and fa1/0

C.       force Windows to use TCP for Kerberos

D.      add “ip icmp error-send” to se1/0/0

 

Correct Answer: C

 

 

QUESTION 196

Refer to the exhibit. What is preventing R4 from learning any networks via OSPF?

 

clip_image009

 

A.       R4 does not have any OSPF neighbors.

B.       There is no OSPF backup designated router on FastEthernet0/0.

C.       The OSPF area number for FastEthernet0/0 does not match the interface network.

D.      There are no OSPF learned routes in the network beyond R4.

 

Correct Answer: A

 

 

QUESTION 197

Refer to the exhibit. What problem does the debug ip ospf event output from R4 indicate?

 

clip_image011

 

A.       a mismatched dead timer between R4 and 209.165.202.130

B.       a mismatched hello timer between R4 and 209.165.202.130

C.       mismatched areas between R4 and 209.165.202.130

D.      mismatched masks between R4 and 209.165.202.130

 

Correct Answer: D

 

 

QUESTION 198

Refer to the exhibit. Which result will the EEM applet in the exhibit produce?

 

clip_image012

 

A.       The output of show version will be executed every 5 hours.

B.       The output of show log will be executed every 5 hours.

C.       The output of show log will be executed every Friday.

D.      The output of show log will be executed every 5 minutes.

 

Correct Answer: B

 

 

QUESTION 199

Refer to the exhibit. Based on the above commands, when will the output of the show log command be saved?

 

clip_image014

 

A.       Each time the total CPU utilization goes below 50 percent

B.       Each time the total CPU utilization goes above 80 percent

C.       Every 5 minutes while the total CPU utilization is above 80 percent

D.      Every 5 seconds while the total CPU utilization is above 80 percent

E.       Every 5 minutes while the total CPU utilization is below 50 percent

F.        Every 5 seconds while the total CPU utilization is below 50 percent

 

Correct Answer: D

 

 

QUESTION 200

Choose two commands that are required to enable multicast on a router, when it is known that the receivers use a specific functionality of IGMPv3. (Choose two.)

 

A.       ip pim rp-address

B.       ip pim ssm

C.       ip pim sparse-mode

D.      ip pim passive

 

Correct Answer: BC

 

Free VCE & PDF File for Cisco 350-001 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …