Download New Updated (Spring 2015) Cisco 350-001 Actual Tests 331-340

By | April 22, 2015

Ensurepass

 

QUESTION 331

Which of the following describes the appropriate port assignment and message exchange in a standard TFTP transaction?

 

A.        Server: 10.0.0.1:69 RRQ/WRQ Sent

Client: 10.0.0.2:1888 RRQ/WRQ Received

 

B.        Server: 10.0.0.1:1888 RRQ/WRQ Received

Client: 10.0.0.2:69 RRQ/WRQ Received

 

C.        Server: 10.0.0.1:69 RRQ/WRQ Received

Client: 10.0.0.2:69 RRQ/WRQ Sent

 

D.        Server: 10.0.0.1:69 RRQ/WRQ Received

Client: 10.0.0.2:1888 RRQ/WRQ Sent

 

E.         Server: 10.0.0.1:1888 RRQ/WRQ Sent

Client: 10.0.0.2:69 RRQ/WRQ Sent

 

F.         Server: 10.0.0.1:1888 RRQ/WRQ Received

Client: 10.0.0.2:69 RRQ/WRQ Sent

 

Correct Answer: D

 

 

QUESTION 332

You are responsible for network monitoring and need to monitor traffic over a routed network from a remote source to an IDS or IPS located in the headquarters site. What would you use in order to accomplish this?

 

A.       VACLs and VSPAN

B.       RSPAN

C.       ERSPAN

D.      NetFlow

 

Correct Answer: C

 

 

QUESTION 333

What is the default maximum reservable bandwidth (percentage) by any single flow on an interface aft
er enabling RSVP?

 

A.       75 percent

B.       60 percent

C.       56 percent

D.      50 percent

E.       25 percent

 

Correct Answer: A

 

 

QUESTION 334

Which two protocols can have their headers compressed through MQC? (Choose two.)

 

A.       RTP

B.       RTSP

C.       HTTP

D.      TCP

E.       UDP

 

Correct Answer: AD

 

 

QUESTION 335

You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also, if the local OSPF route goes away, the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path?

 

A.       static route needs to be added

B.       floating static route needs to be added

C.       bgp backdoor command

D.      ospf backdoor command

Correct Answer: C

 

 

QUESTION 336

In BGP routing, what does the rule of synchronization mean?

 

A.       A BGP router can only advertise an EBGP learned route, provided that the route is an IGP route in the routing table.

B.       A BGP router can only advertise an IBGP learned route, provided that the route is an IGP route in the routing table.

C.       A BGP router can only advertise an IBGP learned route, provided that the route is an IGP route that is not in the routing table.

D.       A BGP router can only advertise an EBGP learned route, provided that the route is a metric of 0 in the BGP table.

 

Correct Answer: B

 

 

QUESTION 337

Router 1 is configured for BGP as dual-homed on the Cisco network. Which three BGP attributes are carried in every BGP update on this router (both IBGP and EBGP)? (Choose three.)

 

A.       origin

B.       router-ID

C.       AS-path

D.      local-preference

E.       next-hop

 

Correct Answer: ACE

 

 

QUESTION 338

In your Cisco EIGRP network, you notice that the neighbor relationship between two of your routers was recently restarted. Which two of these choices could have made this occur? (Choose two.)

 

A.       An update packet with init flag set from a known, already established neighbor relationship was received by one of the routers.

B.       The ARP cache was cleared.

C.       The counters were cleared.

D.       The IP EIGRP neighbor relationship was cleared manually.

 

Correct Answer: AD

 

QUESTION 339

Your Cisco network currently runs OSPF and you have a need to policy-route some specific traffic, regardless of what the routing table shows. Which one of these options would enable you to policy-route the traffic?

 

A.       source IP address and the protocol (such as SSL, HTTPS, SSH)

B.       the packet Time to Live and the source IP address

C.       type of service header and DSCP value

D.      destination IP address

 

Correct Answer: A

 

 

QUESTION 340

You use OSPF as your network routing protocol. You use the command show ip route and you see several routes described as 0, 0 IA, 0 E1, and 0 E2. What routes are in your area?

 

A.       OIA

B.       OE1

C.       O E2

D.      0

 

Correct Answer: D

 

Free VCE & PDF File for Cisco 350-001 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …