Download New Updated (Spring 2015) Cisco 350-050 Actual Tests 21-30

By | April 26, 2015

Ensurepass

 

QUESTION 21

The transmit power level on an 802.11a radio is configured for 25 mW. What is the corresponding value in decibels?

 

A.

2.5 dBm

B.

3 dBm

C.

14 dBm

D.

18 dBm

E.

none of the above

 

Correct Answer: C

 

 

QUESTION 22

Users complain about intermittent wireless connectivity issues. You see the following message on your Cisco WCS, corresponding the time the connectivity issues occurred.

AP ‘building-1-entrance’, interface ‘802.11b/g’ on Controller ‘10.1.1.2’. Noise threshold violated.

What do you do?

 

A.

Increase the interference threshold from the default 10%.

B.

Use a spectrum analyzer to discover the noise source.

C.

Check the logs for rogues in the area, and turn on rogue mitigation.

D.

Increase the power of the APs in the entrance hall.

 

Correct Answer: B

 

 

QUESTION 23

Which environmental phenomena can cause considerable degradation to your wireless signals?

 

A.

multipath, reflection, scattering, refraction

B.

multipath, alpha particles, diversity, absorption

C.

multipath, cosmic radiation, free path loss, scattering

D.

multipath, convergence, refraction, gamma rays

 

Correct Answer: A

 

 

QUESTION 24

You are working for a South American services integrator. Your customer has a working unified Cisco WLC solution in Costa Rica (-A domain). You need to integrate an office in Panama (-N domain); correct APs are already deployed for this domain. Which approach do you take?

 

A.

Do nothing. These APs will work on the same Cisco WLC because the countries are neighbors.

B.

Change the APs in the Panama office to AIR-CAP3502E-N-K9, which have external antennae.

C.

Use the config domain add -N command on the Cisco WLC.

D.

Add the country code for Panama (PA) through the Cisco WLC web GUI.

 

Correct Answer: D

 

 

QUESTION 25

Which role does the Wi-Fi Alliance fulfill regarding WLANs?

 

A.

creates global interoperability for wireless channels and spectrum

B.

maintains and creates the protocol standards by which wireless devices work

C.

ensures that wireless products that are available to consumers provide the features that the products

claim to have

D.

creates strict regulations

Correct Answer: C

 

 

QUESTION 26

One of your customers is thinking of deploying wireless in a building. Which two items should you establish in a pre-site survey? (Choose two.)

 

A.

the exact channels that should be used

B.

the agreed coverage areas for the design

C.

the access security arrangements for getting into the building

D.

the type of deployment (data-only service, voice service, or location services)

E.

sources of RF interference

 

Correct Answer: BD

 

 

QUESTION 27

On AIR-CAP3500 Series APs, which AP mode allows you to intensively analyze the frequency spectrum and detect interferers?

 

A.

Sniffer

B.

Monitor

C.

SE-Connect

D.

Analyzer

E.

Rogue Detector

 

Correct Answer: C

 

 

QUESTION 28

Your site has already been surveyed at 5 GHz for 802.11n VoWLAN services. Which services can you add safely, without conducting an additional site survey? (Choose two.)

 

A.

enhanced Layer 2 or Layer 3 security of the WLAN

B.

optional MFP client protection for Cisco Client Extensions Version 5 clients

C.

802.11n data services on the 2.4 GHz Frequency

D.

802.11n voice services on the 2.4 GHz Frequency

E.

new services (such as location) on both frequencies

 

Correct Answer: AB

 

 

QUESTION 29

Which type of indoor Cisco AP should you deploy to make use of spatial multiplexing?

 

A.

AIR-LAP1242AG

B.

AIR-BR1310G

C.

AIR-LAP1131AG

D.

AIR-LAP1252AG

E.

AIR-LAP1524AG

 

Correct Answer: D

 

QUESTION 30

You are a wireless network administrator for a company that has installed a network that is based on Cisco WLC and uses Aironet 1140 Series APs. The clients are using the 2.4 GHz band and WPA TKIP for Layer 2 security. The president of the company reads a news article on the benefits of 802.11n and wants to deploy it at the office so that the company can use data rates of up to 150 Mb/s. What should you tell the president?

 

A.

You need to change your Layer 2 security policy to WPA2 AES to achieve the 300 Mb/s data rate.

B.

You need to purchase different APs because the 1140 Series supports only up to 54 Mb/s.

C.

You need to change the client Layer 2 security to WPA2 TKIP.

D.

You need to change the client Layer 2 security to open.

E.

802.1n data rates are possible only on 5 GHz.

F.

802.11n data rates are possible with the current client Layer 2 security, but for a theoretical data rate

of 300 Mb/s, you need to use channel bonding, which is not recommended on the 2.4 GHz band.

 

Correct Answer: A

Free VCE & PDF File for Cisco 350-050 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …