Download New Updated (Spring 2015) Cisco 350-050 Actual Tests 91-100

By | April 26, 2015

Ensurepass

 

QUESTION 91

When a wireless client connects to an autonomous AP, which sequence of events will occur when connecting to a SSID that does not broadcast itself?

 

A.

probe request, probe response, association request, association response, authentication request,

authentication response

B.

authentication request, authentication response, probe request, probe response, association request,

association response

C.

probe request, probe response, authentication request, authentication response, association request,

association response

D.

authentication request, authentication response, association request, association response, probe

request, probe response

 

Correct Answer: C

 

 

QUESTION 92

Refer to the exhibit. Given the following GUI output on an autonomous AP, how many additional infrastructure APs are registered to the Cisco WDS AP that is shown in the exhibit, and which Cisco WDS master AP MAC address is used for the WDS registration process?

 

clip_image002

 

A.

Zero and 0022.bd1a.0680

B.

Oneand 0022.bd1a.0680

C.

Twoand 0026.cb53.6d40

D.

Zero and 0026.cb53.6d40

E.

Oneand 0026.cb53.6d40

F.

Oneand 0024.d70c.7ca4 or 001b.7766.d253

 

Correct Answer: B

QUESTION 93

Which three statements about workgroup bridges in a unified environment are true? (Choose three)

 

A.

Web authentication is not supported for use with workgroup bridges.

B.

VLANs are supported for use with workgroup bridges.

C.

Wired clients that connect to a workgroup bridge inherit the QoS and AAA override attributes of the bridge.

D.

If a workgroup bridge associates to a web-authentication WLAN, then the bridge is added to the exclusion

list and all the workgroup bridge wired clients are deleted.

E.

The lightweight feature Cisco CKM is supported for use with a workgroup bridge.

F.

If your AP has two radios, then you can configure both for workgroup bridge mode.

 

Correct Answer: ACD

 

 

QUESTION 94

The QoS implementation for WLANs differs from QoS implementations on other Cisco devices. Which two actions do QoS enabled autonomous bridges perform? (Choose two)

 

A.

They do not classify packets; they prioritize packets based on DSCP value, client type (such as a wireless

phone), or the priority value in the 802.1q or 802.1p tag.

B.

They construct internal DSCP values and support mapping by assigning IP Differentiated Services Code

Point (DSCP), Precedence, or Protocol values to Layer 2 COS values.

C.

They do not match packets using ACL; they use only modular quality of service (MQC) class- map for

matching clauses.

D.

They do not construct internal DSCP values; they only support mapping by assigning IP Differentiated

Services Code Point (DSCP), Precedence, or Protocol values to Layer 2 COS values.

 

Correct Answer: AD

 

 

QUESTION 95

Refer to the exhibit. After setting up an AP to be part of network where WDS is running, you notice that the newly added AP is not able to join the WDS device. On the newly added AP, you only configure wlccp ap username cisco password ccie. You enable debug radius local-server error to help troubleshoot the issue.

Given the debug output, what is the most likely cause of the issue?

 

clip_image004

 

A.

The WDS device is configured as a local RADIUS and the EAP packets are looping in the network.

B.

The WDS device is configured as a local RADIUS and there is a mismatch on the RADIUS shared secret.

C.

The newly added AP is configured with a wrong password.

D.

The RADIUS server is not reachable.

E.

The WDS device is configured for EAP-FAST authentication and the newly added AP is using LEAP.

 

Correct Answer: C

 

 

QUESTION 96

The QoS implementation for WLANs differs from QoS implementation on other Cisco devices. With QoS en
abled on autonomous APs, which two statements are true? (Choose two.)

 

A.

Autonomous APs do not prioritize packets; they classify packets based on DSCP value, client type, or

the priority value in the 802.1Q or 802.1p tag.

B.

Autonomous APs do not construct internal DSCP values; they only support mapping by assigning IP

DSCP, precedence, or protocol values to Layer 2 CoS values.

C.

Autonomous APs do not support 802.1Q or 802.1p tagged packets.

D.

Autonomous APs prioritize the traffic from voice clients over traffic from other clients when the QoS

Element for Wireless Phones feature is enabled.

 

Correct Answer: BD

 

 

QUESTION 97

A network administrator changed some wireless network SSID configuration settings on an autonomous AP. As a result, old clients can still connect by using the saved configuration on their wireless networks; however, new clients are not able to view or connect to the SSID.

What is most likely the cause of the problem?

 

A.

The network administrator configured the SSID to not accept any new clients.

B.

The network administrator removed the broadcast command from the SSID configuration.

C.

The network administrator removed the guest-mode command from the SSID configuration.

D.

The network administrator changed the encryption algorithm of the SSID.

 

Correct Answer: C

 

 

QUESTION 98

When you have an AP in autonomous mode, you can configure the AP to only allow console or Telnet access to authorized users. What is the correct command sequence to achieve RADIUS login authentication via console?

 

A.

configure terminal

aaa new-model

aaa authentication login default

line console 0

login authentication default

radius-server host 172.10.0.1 auth-port 1645 acct-port 1646

B.

configure terminal

aaa new-model

aaa authentication login default group radius

line console 0

login authentication default

radius-server host 172.10.0.1 auth-port 1645 acct-port 1646

C.

configure terminal

aaa new-model

aaa authentication login default group radius

login authentication default

radius-server host 172.10.0.1 auth-port 1645 acct-port 1646

D.

configure terminal

aaa new-model

aaa authentication login default group radius

line console 0

login authentication default group radius

radius-server host 172.10.0.1 auth-port 1645 acct-port 1646

 

Correct Answer: B

 

 

QUESTION 99

Refer to the exhibit. This setup uses two Cisco APs as wireless bridges. One bridge is configured for root bridge mode and the other is configured for non-root bridge mode. Client A associates with the root bridge and Client B associates with the non-root bridge. Which three statements are true? (Choose three.)

 

clip_image006

 

A.

Two bridges that are in root mode can talk to each other.

B.

Only one device can connect to the ethernet connection of the non-root bridge.

C.

For two bridges to communicate with each other, one bridge should be in root mode and the other must

be in non-root mode.

D.

The default setting of a bridge is root.

E.

Two bridges that are in root mode cannot talk to each other.

F.

The default setting of a bridge is non-root.

 

Correct Answer: CDE

 

 

QUESTION 100

When viewing the configuration of an autonomous AP, you see these SNMP commands:

 

snmp-server community comaccess ro 4

snmp-server enable traps snmp authentication

snmp-server host cisco.com version 2c public

 

Which statement about these commands is true?

 

A.

These commands block read-only access for all objects to access list 4 members that use the comaccess

community string. All other SNMP managers have access to any objects.

SNMPv2c sends SNMP Authentication Failure traps to the host cisco.com, using the public community string.

B.

These commands allow write-only access for all objects to access list 4 members that use the comaccess

community string. No other SNMP managers have access to any objects. SNMPv2c sends SNMP

Authentication Failure traps to the host cisco.com, using the public community string.

C.

These commands allow read-only access for all objects to access list 4 members that use the comaccess

community string. No other SNMP managers have access to any objects. SNMPv2c sends SNMP

Authentication Failure traps to the host cisco.com, using the public community string.

D.

These commands allow read-only access to access list 4 members that use the comaccess community

string. SNMPv2c sends SNMP Authentication Failure traps to the host cisco.com, using the public

community string.

 

Correct Answer: C

 

Free VCE & PDF File for Cisco 350-050 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …