Administering Windows Server 2012
Question No: 171 HOTSPOT – (Topic 2)
Your network contains a RADIUS server named Admin1.
You install a new server named Server2 that runs Windows Server 2012 R2 and has Network Policy Server (NPS) installed.
You need to ensure that all accounting requests for Server2 are forwarded to Admin1.
On Server2, you create a new remote RADIUS server group named Group1 that contains Admin1.
What should you configure next on Server2?
To answer, select the appropriate node in the answer area.
Connection request policies are sets of conditions and settings that allow network administrators to designate which Remote Authentication Dial-In User Service (RADIUS) servers perform the authentication and authorization of connection requests that the server running Network Policy Server (NPS) receives from RADIUS clients. Connection request policies can be configured to designate which RADIUS servers are used for RADIUS accounting.
Question No: 172 – (Topic 2)
You have a file server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.
Files created by users in the human resources department are assigned the Department classification property automatically.
You are configuring a file management task named Task1 to remove user files that have not been accessed for 60 days or more.
You need to ensure that Task1 only removes files that have a Department classification property of human resources. The solution must minimize administrative effort.
What should you configure on Task1?
Configure a file screen
Create a condition
Create a classification rule
Create a custom action
Answer: B Explanation:
Create a File Expiration Task
The following procedure guides you through the process of creating a file management task for expiring files. File expiration tasks are used to automatically move all files that match certain criteria to a specified expiration directory, where an administrator can then back those files up and delete them. Property conditions. Click Add to create a new condition based on the file’s classification. This will open the Property Condition dialog box, which allows you to select a property, an operator to perform on the property, and the value to compare the property against. After clicking OK, you can then create additional conditions, or edit or remove an existing condition.
Question No: 173 – (Topic 2)
Your network contains a domain controller named DC1 that runs Windows Server 2012 R2. You create a custom Data Collector Set (DCS) named DCS1.
You need to configure DCS1 to collect the following information:
-> The amount of Active Directory data replicated between DC1 and the other domain controllers
-> The current values of several registry settings
Which two should you configure in DCS1? (Each correct answer presents part of the
solution. Choose two.)
Event trace data
A Performance Counter Alert
System configuration information
A performance counter
Answer: B,C Explanation:
Automatically run a program when the amount of total free disk space on Server1 drops below 10 percent of capacity.
You can also configure alerts to start applications and performance logs Log the current values of several registry settings.
System configuration information allows you to record the state of, and changes to, registry keys.
Total free disk space
Run a program on alert
Reference: http: //technet. microsoft. com/en-us/library/cc766404. aspx
Question No: 174 – (Topic 2)
Your network contains one Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
A central store is configured on a domain controller named DC1.
You have a custom administrative template file named App1.admx. App1.admx contains application settings for an application named App1.
You copy App1.admx to the central store. You create a new Group Policy object (GPO) named App1.Settings.
When you edit App1.Settings, you receive the warning message shown in the following exhibit.
You need to ensure that you can edit the settings for App1 from the app1_settings GPO.
Modify the permissions of the ADMX file.
Copy an ADML file to the central store.
Add an administrative Template to the App1_settings GPO.
Move the DAMX file to the local Policy definitions folder.
Answer: B Explanation:
This error indicates that the .adml file of Appc1.admx is not found in your central store. Please check whether the App1.adml file exists in #39;\SYSVOL\domainname\Policies\PolicyDefinitions\en-us#39;. (en-us is for English version ADML files)
Question No: 175 HOTSPOT – (Topic 2)
Your network contains an Active Director domain named contoso.com. The domain contains a file server named Server1. All servers run Windows Server 2012 R2.
You have two user accounts named User1 and User2. User1 and User2 are the members of a group named Group1. User1 has the Department value set to Accounting, user2 has the Department value set to Marketing. Both users have the Employee Type value set to Contract Employee.
You create the auditing entry as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Question No: 176 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Network Policy and Access Services server role installed.
You plan to deploy additional servers that have the Network Policy and Access Services server role installed. You must standardize as many settings on the new servers as possible.
You need to identify which settings can be standardized by using Network Policy Server (NPS) templates.
Which three settings should you identify? (Each correct answer presents part of the solution. Choose three.)
connection request policies
Question No: 177 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Desktop Session Host role service installed. The computer account of Server1 resides in an organizational unit (OU) named OU1.
You create and link a Group Policy object (GPO) named GPO1 to OU1.
You need to prevent GPO1 from applying to your user account when you log on to Server1. GPO1 must apply to every other user who logs on to Server1.
What should you configure?
Answer: D Explanation:
You can use item-level targeting to change the scope of individual preference items, so they apply only to selected users or computers. Within a single Group Policy object (GPO), you can include multiple preference items, each customized for selected users or
computers and each targeted to apply settings only to the relevant users or computers. Reference: https://technet.microsoft.com/en-us/library/cc733022.aspx
Question No: 178 – (Topic 2)
Your network contains one Active Directory domain named contoso.com. The forest functional level is Windows Server 2012. All servers run Windows Server 2012 R2. All client computers run Windows 8.1.
The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. All domain controllers and RODCs are hosted on a Hyper-V host that runs Windows Server 2012 R2.
You need to identify which domain controller must be online when cloning a domain controller.
Which cmdlet should you use?
Explanation: One requirement for cloning a domain controller is an existing Windows Server 2012 DC that hosts the PDC emulator role. You can run the Get-ADDomain and retrieve which server has the PDC emulator role.
Example: Command Prompt: C:\PSgt; Get-ADDomain
Output wouldinclude a line such as: PDCEmulator : Fabrikam-DC1.Fabrikam.com
Not A: The Get-ADGroupMember cmdlet gets the members of an Active Directory group. Members can be users, groups, and computers.
Not E: The Get-ADOptionalFeature cmdlet gets an optional feature or performs a search to retrieve multiple optional features from an Active Directory.
Not F: The Get-ADAuthorizationGroup cmdlet gets the security groups from the specified user, computer or service accounts token.
Reference: Step-by-Step: Domain Controller Cloning
Reference: Get-ADDomain https://technet.microsoft.com/en-us/library/ee617224.aspx
Question No: 179 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains six domain controllers. The domain controllers are configured as shown in the following table.
The network contains a server named Server1 that has the Hyper-V server role installed. DC6 is a virtual machine that is hosted on Server1.
You need to ensure that you can clone DC6. What should you do?
Transfer the schema master to DC6.
Transfer the PDC emulator to DC5.
Transfer the schema master to DC4.
Transfer the PDC emulator to DC2.
Answer: D Explanation:
A deployed Windows Server 2012 domain controller (virtualized or physical) that hosts the PDC emulator role (DC1). To verify whether the PDC emulator role is hosted on a Windows Server 2012 domain controller, run the following Windows PowerShell command:
Get-ADComputer (Get-ADDomainController -Discover -Service quot;PrimaryDCquot;).name
Reference: http: //technet. microsoft. com/en-us/library/hh831734. aspx#steps_deploy_vdc
Question No: 180 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
All client computers run Windows 8 Enterprise.
DC1 contains a Group Policy object (GPO) named GPO1.
You need to update the PATH variable on all of the client computers. Which Group Policy preference should you configure?
Answer: D Explanation:
Environment Variable preference items allow you to create, update, replace, and delete user and system environment variables or semicolon-delimited segments of the PATH variable. Before you create an Environment Variable preference item, you should review the behavior of each type of action possible with this extension.
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|