[Free] 2018(Jan) EnsurePass Pass4sure Cisco 300-075 Dumps with VCE and PDF 231-240

By | January 29, 2018

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Cisco Official New Released 300-075
100% Free Download! 100% Pass Guaranteed!

Implementing Cisco IP Telephony amp; Video, Part 2 v1.0

Question No: 231

When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?

  1. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.

  2. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.

  3. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.

  4. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.

Answer: C

Explanation: Incorrect answer: ABD

calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character .

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03trpat.ht ml

Question No: 232

Which bandwidth amounts are correct for configuring locations?

  1. 8 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722

  2. 8 kb/s for G.729, 64 kb/s for G.711, and 16 kb/s for G.722

  3. 64 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722

  4. 8 kb/s for G.729, 8 kb/s for G.711, and 8 kb/s for G.722

Answer: A

Question No: 233

Which three options are overlapping parameters for roaming when a device is configured for

Device Mobility? (Choose three.)


device pool




network locale


codec E. MRGL F.


Answer: B,C,E Explanation:

The overlapping parameters for roaming-sensitive settings are Media Resource Group List, Location, and Network Locale. The overlapping parameters for the Device Mobility-related settings are Calling Search Space (called Device Mobility Calling Search Space at the device pool), AAR Group, and AAR Calling Search Space. Overlapping parameters configured at the phone have higher priority than settings at the home device pool and lower priority than settings at the roaming device pool.

Reference: https://supportforums.cisco.com/document/77096/device-mobility

Question No: 234

Which configuration does Cisco recommend for the peer address on the Expressway-C secure traversal zone when the Expressway-E has one NIC enabled?

  1. Expressway-E internal IP address

  2. Expressway-E external IP address

  3. Expressway-E internal FQDN

  4. Expressway-E external FQDN

Answer: B

Question No: 235

How are Cisco IP Phones directly configured to utilize local route groups?

  1. with Cisco Unified Communications Manager device pools

  2. with Cisco Unified Communications Manager CSS and partitions

  3. with Cisco Unified Communications Manager regions

  4. with Cisco Unified Communications Manager locations

  5. with Cisco Unified Communications Manager AAR

Answer: A

Question No: 236

Which two statements about remote survivability are true? (Choose two.)

  1. SRST supports more Cisco IP Phones than Cisco Unified Communications Manager Express in SRST mode.

  2. Cisco Unified Communications Manager Express in SRST mode supports more Cisco IP Phones than SRST.

  3. MGCP fallback is required for ISDN call preservation.

  4. MGCP fallback functions with SRST.

Answer: A,D

Question No: 237

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

What media resource should be configured in Cisco Unified Communications Manager?

  1. Cisco Media Termination Point Hardware

  2. Cisco IOS Enhanced Media Termination Point Cisco

  3. Cisco IOS Media Termination Point

  4. Cisco Media Termination Point Hardware (WS-SVC-CMM)

Answer: B

Explanation: Incorrect answer: ACD

Each media termination point receives a list of Cisco Unified Communications Managers, in priority order, to which it should attempt to register. Each media termination point can register with only one Cisco Unified Communications Manager at a time.

Link: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example0 9186a0080b4f916.shtml

Question No: 238

A voice engineer is enabling video capabilities between H.323 and SIP endpoints. Which component allows for standardized caller addresses between the endpoints?


search rules


SIP route pattern


policy service



Answer: B


http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_guide_chapter09 186a00


Question No: 239

The Cisco Unified Communications system of a company has five types of devices:

鈥isco Jabber Desktop





Which two types of devices are affected when an engineer changes the DSCP for TelePresence

Calls service parameter? (Choose two.)


a Cisco Jabber Desktop









Answer: D,E

Question No: 240

Where do you specify the device mobility group and physical location after they have been configured?

  1. phones

  2. DMI

  3. device mobility CSS

  4. device pool

  5. MRGL

  6. locale

Answer: D

100% Ensurepass Free Download!
Download Free Demo:300-075 Demo PDF
100% Ensurepass Free Guaranteed!
300-075 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.