[Free] 2018(Jan) EnsurePass Pass4sure Cisco 300-115 Dumps with VCE and PDF 1-10

By | January 29, 2018
0 Comment

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Cisco Official New Released 300-115
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/300-115.html

Implementing Cisco IP Switched Networks

Question No: 1

Which portion of AAA looks at what a user has access to?

  1. authorization

  2. authentication

  3. accounting

  4. auditing

Answer: A

Question No: 2

Which information does the subordinate switch in a switch stack keep for all the VLANs that are configured on it?

  1. VLAN database

  2. DHCP snooping database

  3. spanning trees

  4. routing information

Answer: C

Question No: 3

What is the default HSRP priority?

A. 50 B. 100 C. 120 D. 1024

Answer: B

Question No: 4

Your customer has asked you tocome in and verify the operation of routers R1 and R2

which are configured to use HSRP. They have questions about how these two devices will perform in the event of a device failure.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

What is the virtual mac-address of HSRP group 1?

A. 0000.0c07.ac02 B. 4000.0000.0010 C. 0000.0c07.ac01 D. 4000.0000.ac01 E. 4000.0000.ac02 F. 0000.0c07.0010

Answer: B

Question No: 5

Ensurepass 2018 PDF and VCE

Refer to the exhibit. Which statement about the interface is true?

  1. The interface is down.

  2. The other side of the interface is set as access.

  3. The switch port command is missing from the configuration

  4. The interfaceneeds no shutdown configured.

Answer: A

Question No: 6

DHCP snooping and IP Source Guard have been configured on a switch that connects to several client workstations. The IP address of one of the workstations does not match any entries found in the DHCP binding database. Which statement describes the outcome of this scenario?

  1. Packets from the workstation will be rate limited accordingto the default values set on the switch.

  2. The interface that is connected to the workstation in question will be put into the errdisabled state.

  3. Traffic will pass accordingly after the new IP address is populated into the binding database.

  4. The packets originating from the workstation are assumed to be spoofed and will be discarded.

Answer: D

Question No: 7

Given the configuration on a switch interface, what happens when a host with the MAC address of 0003.0003.0003is directly connected to the switch port?

switchport mode access switchport port-security

switchport port-security maximum 2

switchport port-security mac-address 0002.0002.0002 switchport port-security violation shutdown

  1. The host will be allowed to connect.

  2. The port will shut down.

  3. The host can only connect through a hub/switch where 0002.0002.0002 is already connected.

  4. The host will be refused access.

Answer: A

Question No: 8

In which two ways can a port respond to a port-security violation? (Choose two.)

  1. The port enters the en-disabled state

  2. The Security Violation counter is incremented and the port sends an SNMP trap

  3. The Security Violation counter is incremented and the port sends a critical syslog message to the console

  4. The port triggers an EEM script to notify support staff and continues to forward traffic normally D

  5. The port immediately begins to drop all traffic.

  6. The port enters the shutdown state.

Answer: A,F

Question No: 9

A network engineer wants to make sure that an access switch will never become a Spanning Tree root for VLAN 5. What action will accomplish this task?

  1. adjust STP priority to the maximum value

  2. disable STP globally

  3. apply root guard to all outgoing neighbor interfaces

  4. enable MSTP and use a different revision number than all other switches

Answer: A

Question No: 10

While working in the core network building, a technician accidently bumps the fiber connection between two core switches and damages one of the pairs of fiber. As designed, the link was placed into a non-forwarding state due to a fault with UDLD. After the damaged cable was replaced, the link did not recover. What solution allows the network switch to automatically recover from such an issue?

  1. macros

  2. errdisable autorecovery

  3. IP Event Dampening

  4. command aliases

  5. Bidirectional Forwarding Detection

Answer: B

100% Ensurepass Free Download!
–Download Free Demo:300-115 Demo PDF
100% Ensurepass Free Guaranteed!
–300-115 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.