Oracle Solaris 11 System Administration
Question No: 11 – (Topic 1)
Your server has a ZFS storage pool that is configured as follows:
The following partition scheme is used for every disk drive in pool1:
Which two are true regarding the ZFS storage pool?
The data on c3t3d0 is duplicated on c3t4do.
The data is striped across disks c3t3d0 and c3t4do and mirrored across vdevs mirror-0 and mirror-1.
The storage pool is 146 GB total size (rounded to the nearest GB).
The storage pool is 584 G8 total size (rounded to the nearest GB).
The storage pool is 292 GB total size (rounded to the nearest GB).
Question No: 12 – (Topic 1)
Which two accurately identify features of a Solaris 10 branded zone?
executes in a Solaris 10 global zone
is created by importing a Solaris 10 flash archive
enables Linux binary applications to run unmodified
provides a complete runtime environment for Solaris 9 applications
allows a Solaris 10 global zone to be migrated into a Solaris 10 non-global zone on a Solaris 11 system
Answer: B,E Explanation:
B: It can be created by importing a Solaris 10 flash archive.
You can use the Oracle Solaris Flash archiving tools to create an image of an installed system that can be migrated into a zone.
The system can be fully configured with all of the software that will be run in the zone before the image is created. This image is then used by the installer when the zone is installed.
Note: You can use alternate methods for creating the archive. The installer can accept the following archive formats:
gzip compressed cpio archives
bzip2 compressed cpio archives
pax archives created with the -x xustar (XUSTAR) format 脛 ufsdump level zero (full) backups
Branded zones that run an environment different that the OS release on the system
The lx branded zone introduced in the Solaris 10 8/07 release provides a Linux environment for your applications and runs on x86 and x64 machines on the Oracle Solaris
The solaris8 and solaris9 branded zones enable you to migrate an Oracle Solaris 8 or Oracle Solaris 9 system to an Oracle Solaris 8 or Oracle Solaris 9 Container on a host running the Oracle Solaris 10 8/07 Operating System or later Oracle Solaris 10 release.
The Oracle Solaris 10 Container brand is available in OpenSolaris build 127. These branded zones host Oracle Solaris 10 user environments.
Note: One of the powerful features of Solaris 11 is the ability to run a Solaris 10 environment in a zone. Solaris 10 allows you to run Solaris 8 and 9 environments in zones,but only on SPARC.
Question No: 13 – (Topic 1)
User jack,whose account is configured to use the korn shell,logs in and examines the value of his PATH environment variable:
What will happen,and why?
He will get a quot;file not foundquot; error,because the current directory is not in his seaech path.
He will get a quot;file not foundquot; error,because his home directory is not in his search path.
The useradd script will execute,because jack is in the same directory that the script is located in.
The command /user/sbin/useradd will execute,because it is the last match in the search path.
The command /user/sbin/useradd will execute,because it is the first match in the search path.
Question No: 14 – (Topic 1)
User jack on host solaris attempts to use ssh to log in to host oracle and receives this message:
jack@solaris:~$ ssh oracle
ssh: connect to host oracle port 22: connection refused What is the problem?
Host oracle does not have a valid host public key.
Host oracle does not have a valid host private key.
Host solaris does not have a valid host public key.
Host does not have a valid host private key.
Host solaris is not configured for host-based authentication.
Host oracle is not configured for host-based authentication.
Host oracle is not running the ssh service.
Host solaris is not running the ssh service.
Answer: G Explanation:
The host he is trying to connect to (oracle) is not running the required service (ssh).
Question No: 15 – (Topic 1)
Your server has one zone named dbzone (hat has been configured,but not yet installed). Which command would you use to view all the options that were used to configure this zone?
zoneadm list -icv dbzone
zones tat -c summary dbzone
zonecfg -z dbzone info
zonecfg -icv dbzone info
Answer: C Explanation: zonecfg info
Display information about the current configuration. If resource-type is specified,displays only information about resources of the relevant type. If any property-name value pairs are specified,displays only information about resources meeting the given criteria. In the resource scope,any arguments are ignored,and info displays information about the resource which is currently being added or modified.
Note: zonecfg -z
zonename. Specify the name of a zone. Zone names are case sensitive. Zone names must begin with an alphanumeric character and can contain alphanumeric characters,the underscore (_) the hyphen (-),and the dot (.). The name global and all names beginning with SUNW are reserved and cannot be used.
A: The zoneadm utility is used to administer system zones. A zone is an application container that is maintained by the operating system runtime.
Display the name of the current zones,or the specified zone if indicated. B: No such command.
D: no such options zonecfg -icv
Question No: 16 – (Topic 1)
View the Exhibit and review the file system information displayed from a remote server.
You are configuring a new server. This new server has the following storage pool configured:
This new server also has the following file systems configured:
When you are finished building this new server,the pool1/data dataset must be an exact duplicate of note server. What is the correct procedure to create the pool1/data dataset on this new server?
zfs create -o mountpoint=/data -o refquota=1g pool1/data
zfs set mountpoint=none pool1zfs create pool1/data
zfs set mountpoint=none pool1zfs create -o mountpoint=/data -o quota=1g pool1/data
zfs create quota=1g pool1/data
zfs create mountpoint=/data pool1/data
zfs set quota=1g pool1/data
Question No: 17 – (Topic 1)
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface,you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
crontab – e vi
Answer: A Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you#39;d like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
C: -e Edits a copy of the current user#39;s crontab file,or creates an empty file to edit if crontab does not exist. When editing is complete,the file is installed as the user#39;s crontab file. If a username is given,the specified user#39;s crontab file is edited,rather than the current user#39;s crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file,because cron is not aware of changes made this way.
Question No: 18 – (Topic 1)
You need to configure an ISCSI target device on your x86 based Oracle Solaris II system.
While configuring the iSCSI device,the following error is displayed: bash: stmfadm: command not found
Which option describes the solution to the problem?
The COMSTAR feature is not supported on the x86 platform. The feature is supported only on the SPARC platform.
Use the iscsitadm command on the x86 platform when configuring an iSCSI target.
Install the storage-server group package on this system.
Start the iSCSI target daemon on this system.
Answer: C Explanation:
STMF – Manages transactions,such as context and resources for Small Computer System Interface (SCSI) command execution,and tracking logical unit and port providers. STMF also handles logical unit mappings,allocating memory,recovering failed operations,enumeration,and other necessary functions of an I/O stack.
STMF is controlled by stmfadm,and stmfadm is the majority of the commands you will be using to administer COMSTAR (COmmon Multiprotocl Scsi TARget).
Install the packages you need for COMSTAR with iSCSI and reboot:
# pfexec pkg install storage-server
# pfexec pkg install SUNWiscsit
# shutdown -y -i6 -g0
Note: You can set up and configure a COMSTAR Internet SCSI (iSCSI) target and make it available over the network. The iSCSI features can work over a normal Internet connection (such as Ethernet) using the standard iSCSI protocol. The iSCSI protocol also provides naming and discovery services,authentication services using CHAP and RADIUS,and centralized management through iSNS.
The COMSTAR target mode framework runs as the stmf service. By default,the service is disabled. You must enable the service to use COMSTAR functionality. You can identify the service with the svcs command. If you have not rebooted the server since installing the group/feature/storage-server package,the service might not be enabled correctly.
Question No: 19 – (Topic 1)
Your system is assigned an IP address object 192.168.0.222/24. However,the net mask-expressed as four octets-is required. Which is the correct netmask?
Answer: C Explanation:
A 24-bit network mask is expressed as 255.255.255.0.
Question No: 20 – (Topic 1)
Which option displays the result of running the zfs list command?
Answer: B Explanation:
The zfs list command provides an extensible mechanism for viewing and querying dataset information.
You can list basic dataset information by using the zfs list command with no options. This command displays the names of all datasets on the system and the values of their used,available,referenced,and mountpoint properties. For more information about these properties,see Introducing ZFS Properties.
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
pool 476K 16.5G 21K /pool pool/clone 18K 16.5G 18K /pool/clone
pool/home 296K 16.5G 19K /pool/home pool/home/marks 277K 16.5G 277K /pool/home/marks pool/home/marks@snap 0 – 277K –
pool/test 18K 16.5G 18K /test
EnsurePass ExamCollection Testking Lowest Price Guarantee Yes No No Up-to-Dated Yes No No Real Questions Yes No No Explanation Yes No No PDF VCE Yes No No Free VCE Simulator Yes No No Instant Download Yes No No