[Free] 2018(Jan) EnsurePass Testinsides Oracle 1z0-879 Dumps with VCE and PDF 11-20

By | January 25, 2018

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Oracle Official New Released 1z0-879
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/1z0-879.html

Oracle Solaris 10 System

Question No: 11 – (Topic 1)

You need to change the hostname and IP address of a server. Without manually editing all of the required files, which command can be run to restore a system configuration to an unconfigured state, ready to be reconfigured again restore a system configuration to an unconfigured state, ready to be reconfigured again?

  1. /usr/sbin/sys-unconfig

  2. /usr/sbin/unconfig

  3. /sbin/ipconfig

  4. /usr/sbin/set_parms initial

Answer: A

Question No: 12 – (Topic 1)

A host named client12 is having difficulty communicating with a heavily used server named server14. The server14 server has the ce0, ce1, ce4, and qfe4 interfaces active. The client12, admin6, and appserv5 hosts are all on a private network and access the ce4 interface on server14 exclusively and cannot access other network interfaces on server14. The appserv5 and admin6 hosts are currently generating heavy traffic to server14 due to a running batch process. Which two commands can you run on server14 to look at the network traffic generated between only client12 and server14 to assist in troubleshooting the communication issue? (Choose two.)

  1. snoop !admin6

  2. snoop -d client12

  3. snoop -d ce server14

  4. snoop -d ce4 client12

  5. snoop -d ce4 client12 server14

  6. snoop -i ce4 server14 client12

Answer: D,E

Question No: 13 – (Topic 1)

To save time configuring some custom network facilities, a junior administrator in your company attempts to copy some entries from the /etc/inetd.conf file on a Solaris 8 OS

server into the /etc/inetd.conf on a Solaris 10 OS server. The junior administrator is unable to determine why services do not start. Which two commands can you run on the Solaris 10 OS server to start the services? (Choose two.)

  1. inetconv -f

  2. inetcfg -i /etc/inetd.conf

  3. inetcfg -o /etc/inetd.conf

  4. inetconv -f -i /etc/inetd.conf

  5. inetconv -forceimport -o /etc/inetd.conf

Answer: A,D

Question No: 14 – (Topic 1)

When your Solaris system is booted, a startup script initializes the rpcbind service. Which script is it?

  1. /lib/svc/method/net-physical

  2. /etc/rcS.d/S30network

  3. svc:/network/rpc/bind:default

  4. /lib/svc/method/rpc-bind

Answer: D

Question No: 15 – (Topic 1)

You need to register your x86-based system on a JumpStart server. Which option specifies that this x86 system is a DHCP client?

  1. -d

  2. -e

  3. -c

  4. -p

Answer: A

Question No: 16 – (Topic 1)

You have just configured the network interface on systemA. The following information is displayed pertaining to the network interface on systemA:

Ensurepass 2018 PDF and VCE

From systemB, you test the network connectivity by sending ICMP ECHO_REQUEST packets to systemA. The following message is displayed:

no answer from systemA

What is most likely the problem?

  1. The interface is not plumbed.

  2. The interface is not configured.

  3. The interface does not have valid routes configured.

  4. The interface is not marked as

Answer: D

Question No: 17 – (Topic 1)

Youe just configured the network interface on You?e just configured the network interface on systemA and the following information is displayed pertaining to systemA#39;s network interface:

Ensurepass 2018 PDF and VCE

You have been instructed to change the name of this system to systemB. Which four files need to be modified to change the name of this system from systemA to systemB? (Choose four)

  1. /etc/nodename

  2. /etc/hostname.rtls0

  3. /etc/hostname

  4. /etc/inet/hosts

  5. /etc/domainname

  6. /etc/inet/ipnodes

  7. /etc/inetd.conf

Answer: A,B,D,F

Question No: 18 – (Topic 1)

Your company security policy does not allow you to connect your servers directly to the internet. You would like to utilize some of theYour company? security policy does not allow you to connect your servers directly to the internet. You would like to utilize some of the functionality in Solaris 10 to analyze your systems for available OS updates, and also download and install those updates from Sun Microsystems. Which answer describes how to utilize this functionality to analyze your systems for available OS updates, and also download and install those updates without connecting your server directly to the internet?

  1. Get the patches on DVD and use Solaris 10 patch manager tools to analyze your server against the updates on the DVD.

  2. Connect your server via sftp only when you need to analyze your server for updates.

  3. Use the update manager proxy software and re-direct the client to look for updates on the proxy server.

  4. You will not be able to use the update utility to automatically search for updates at Sun Microsystems because the utility requires connecting to a Sun server over the internet.

Answer: C

Question No: 19 – (Topic 1)

In Solaris 10, this tool provides an automated and proactive approach to patch management. It provides a graphical user interface as well as a command line interface. Which tool is it?

  1. smpatch

  2. Patchtool

  3. Update manager

  4. Patch manager

Answer: C

Question No: 20 – (Topic 1)

You need to quickly obtain the physical and logical device names for the disks attached to

the server. Which command achieves this?

  1. config

  2. format

  3. devices

  4. prtconf | grep name

Answer: B

100% Ensurepass Free Download!
Download Free Demo:1z0-879 Demo PDF
100% Ensurepass Free Guaranteed!
1z0-879 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.