[Free] 2018(Jan) EnsurePass Testinsides VMware VCI510 Dumps with VCE and PDF 111-120

By | January 25, 2018

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan VMware Official New Released VCI510
100% Free Download! 100% Pass Guaranteed!

VMware Certified Professional 5 – Data Center Virtualization for Instructors

Question No: 111 – (Topic 3)

Which are the correct parameters to specify when adding an iSCSI target to an ESXi 5.x host using the Static Discovery tab?

  1. iSCSI server ip address, port 902

  2. iSCSI server ip address, port 3260

  3. iSCSI server ip address, port 902, iSCSI target name

  4. iSCSI server ip address, port 3260, iSCSI target name

Answer: D

Reference: http://kb.vmware.com/selfservice/microsites/search.do?language=en_USamp;cmd=displayKC


Question No: 112 – (Topic 3)

An administrator decides to implement a Fixed multipathing policy for an ESXi 5.x host with four available paths to one VMFS datastore. After the policy has been enabled for the datastore, how many paths will have an active status by default?

  1. 4

  2. 3

  3. 1

  4. 2

Answer: A Explanation:

When the policy has been enabled for the datastore, 4 paths will have active status by default.

Question No: 113 – (Topic 3)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

What does the graph in the exhibit indicate?

  1. The average amount of read and write latency from the ESXi host to the SAN.

  2. The average amount of read and write latency from the guest operating system to the virtual machine virtual disk file.

  3. The average amount of read and write latency from the ESXi host to the datastore.

  4. The average amount of read and write latency from the cluster to the datastore.

Answer: C

Reference: http://vmdamentals.com/?p=2603

Question No: 114 – (Topic 3)

A request has been made to the SAN administrator to provision a new LUN. A LUN (LUN

6) is created, and the SAN administrator presents the LUN to an ESXi 5.x host, using the storage array SAN management software. The administrator looks at the Storage configuration for the ESXi host, and does not see the new LUN. Other LUNs from the same storage array are visible.

Which two conditions are most likely to cause the error described? (Choose two.)

  1. The administrator has not performed a Rescan All on the ESXi host.

  2. The multipathing policy has been set to Fixed for the LUN.

  3. Zoning on the Fibre Channel switches is not configured correctly.

  4. The LUN was not presented to the correct ESXi host.

Answer: A,D


The cause of the error is that the administrator didn’t perform a rescan all of ESXi host. Whenever a new LUN is provisioned, a manual rescan all has to be performed to enable ESXi to discover new LUNs. The second possibility is that the new LUN was not presented to the ESXi host that was intended by the administrator.

Question No: 115 – (Topic 3)

When comparing software iSCSI initiators with independent hardware initiators, what are the additional CHAP security levels available for a software implementation? (Choose two.)

  1. Do not use CHAP unless required by target

  2. Use CHAP

  3. Use CHAP unless prohibited by target

  4. Do not use CHAP

Answer: A,B

Reference: http://searchvmware.techtarget.com/tip/VSphere-iSCSI-initiator-authentication- changes-enhance-system-uptime-security

Question No: 116 – (Topic 3)

The storage administrator is preparing an action plan to upgrade a Fibre Channel storage array.

The current plan will result in extended downtime for a VMFS LUN that is part of a SDRS cluster.

What steps can be taken in a vSphere 5.x environment to minimize the impact of the downtime? (Choose two.)

  1. Ensure there are multiple active paths to the LUN

  2. Ensure DRS is configured properly

  3. Use Storage vMotion to migrate the affected VMDKs

  4. Place the datastore into maintenance mode

Answer: C,D

Reference: http://blog.mwpreston.net/vcp-5/vcp-5-objective-5-4-migrate-virtual-machines/

Question No: 117 – (Topic 3)

Which two types of information can be obtained about a VMFS datastore using the Summary tab for a connected host in the vSphere Client? (Choose two.)

  1. Multipathing status for the datastore

  2. Hardware Acceleration status

  3. Alarm Actions status for the datastore

  4. Runtime name of the datastore

Answer: B,C

Reference: http://pubs.vmware.com/vsphere-4-esxi-installable- vcenter/index.jsp?topic=/com.vmware.vsphere.esxi_server_config.doc_41/esx_server_conf ig/introduction_to_storage/c_displaying_datastores.html

Question No: 118 – (Topic 3)

An administrator is configuring an ESXi 5.x host with two dual-port Fibre Channel (FC) HBAs. The FC storage array has four active storage processor ports. Zoning is configured on both fabrics, with ESXi HBA ports and the array ports in the same zone. There are two LUNs with VMFS datastores configured.

Using Round Robin multipathing, what is the maximum number of paths that can be used to send data to the VMFS datastores at any given time?

  1. 2

  2. 3

  3. 1

  4. 4

Answer: A Explanation:

Multi-pathing is set on the HBA level and there are 2 HBAs. Therefore they will alternate on each HBA.

Question No: 119 – (Topic 3)

Which three features can be used in combination with network-attached storage (NAS)? (Choose three.)

  1. Datastores up to 64TB

  2. virtual-mode RDMs

  3. N-Port ID Virtualization

  4. Storage I/O control

  5. VMware Storage DRS

Answer: A,D,E Explanation:

In vSphere, you can use NAS with datastores up to 64 TB in capacity, storage I/O control and Storage DRS. NAS supports all three of these.

Question No: 120 – (Topic 3)

Which three files are valid virtual machine files that might be identified when examining a folder that contains a virtual machine template on a VMFS datastore? (Choose three.)

  1. RDM map file (-rdm.vmdk)

  2. BIOS settings file (.bios)

  3. Template file (.vmtx)

  4. Lock file (.lck)

  5. Suspended state file (.vmsn)

Answer: A,C,E Explanation:

RDM map file, template file and suspended state file are virtual machine files that reside in a folder named after that virtual machine. The template file is related to virtual machines configurations and the suspended state file is related to configuration that suspends virtual machines. RDM is a mapping file in a separate VMFS volume that acts as a proxy for a raw physical storage device. The RDM allows a virtual machine to directly access and use the

storage device. The RDM contains metadata for managing and redirecting disk access to the physical device.

The file gives you some of the advantages of direct access to a physical device while keeping some advantages of a virtual disk in VMFS. As a result, it merges VMFS manageability with raw device access.

RDMs can be described in terms such as mapping a raw device into a datastore, mapping a system LUN, or mapping a disk file to a physical disk volume. All these terms refer to RDMs.

100% Ensurepass Free Download!
Download Free Demo:VCI510 Demo PDF
100% Ensurepass Free Guaranteed!
VCI510 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.