[Free] 2018(July) Dumps4cert CompTIA SY0-401 Dumps with VCE and PDF Download 591-600

By | July 17, 2018

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 July CompTIA Official New Released SY0-401
100% Free Download! 100% Pass Guaranteed!

CompTIA Security Certification

Question No: 591 – (Topic 3)

The security administrator is analyzing a user’s history file on a Unix server to determine if the user was attempting to break out of a rootjail. Which of the following lines in the user’s history log shows evidence that the user attempted to escape the rootjail?

A. cd ../../../../bin/bash

  1. whoami

  2. ls /root

  3. sudo -u root

Answer: A Explanation:

On modern UNIX variants, including Linux, you can define the root directory on a perprocess basis. The chroot utility allows you to run a process with a root directory other than /.

The root directory appears at the top of the directory hierarchy and has no parent: A process cannot access any files above the root directory (because they do not exist). If, for example, you run a program (process) and specify its root directory as /home/sam/jail, the program would have no concept of any files in /home/sam or above: jail is the program#39;s root directory and is labeled / (not jail).

By creating an artificial root directory, frequently called a (chroot) jail, you prevent a program from accessing or modifying-possibly maliciously-files outside the directory hierarchy starting at its root. You must set up a chroot jail properly to increase security: If you do not set up the chroot jail correctly, you can actually make it easier for a malicious user to gain access to a system than if there were no chroot jail.

The command cd .. takes you up one level in the directory structure. Repeated commands would take you to the top level the root which is represented by a forward slash /. The command /bin/bash is an attempt to run the bash shell from the root level.

Question No: 592 – (Topic 3)

A security administrator must implement a network that is immune to ARP spoofing attacks. Which of the following should be implemented to ensure that a malicious insider will not be able to successfully use ARP spoofing techniques?

  1. UDP

  2. IPv6

  3. IPSec

  4. VPN

Answer: B

Explanation: ARP is not used in IPv6 networks.

The Address Resolution Protocol (ARP) is a telecommunication protocol used for resolution of network layer addresses into link layer addresses, a critical function in multiple-access networks. ARP is used for converting a network address (e.g. an IPv4 address) to a physical address like an Ethernet address (also named a MAC address).

In Internet Protocol Version 6 (IPv6) networks, the functionality of ARP is provided by the Neighbor Discovery Protocol (NDP).

Question No: 593 – (Topic 3)

Jane, an individual, has recently been calling various financial offices pretending to be another person to gain financial information. Which of the following attacks is being described?

  1. Phishing

  2. Tailgating

  3. Pharming

  4. Vishing

Answer: D Explanation:

Vishing (voice or VoIP phishing) is an electronic fraud tactic in which individuals are tricked into revealing critical financial or personal information to unauthorized entities. Vishing works like phishing but does not always occur over the Internet and is carried out using voice technology. A vishing attack can be conducted by voice email, VoIP (voice over IP), or landline or cellular telephone.

The potential victim receives a message, often generated by speech synthesis, indicating that suspicious activity has taken place in a credit card account, bank account, mortgage account or other financial service in their name. The victim is told to call a specific telephone number and provide information to quot;verify identityquot; or to quot;ensure that fraud does not occur.quot; If the attack is carried out by telephone, caller ID spoofing can cause the victim#39;s set to indicate a legitimate source, such as a bank or a government agency.

Vishing is difficult for authorities to trace, particularly when conducted using VoIP. Furthermore, like many legitimate customer services, vishing scams are often outsourced to other countries, which may render sovereign law enforcement powerless.

Consumers can protect themselves by suspecting any unsolicited message that suggests they are targets of illegal activity, no matter what the medium or apparent source. Rather than calling a number given in any unsolicited message, a consumer should directly call the institution named, using a number that is known to be valid, to verify all recent activity and to ensure that the account information has not been tampered with.

Question No: 594 – (Topic 3)

Which of the following is an example of a false positive?

  1. Anti-virus identifies a benign application as malware.

  2. A biometric iris scanner rejects an authorized user wearing a new contact lens.

  3. A user account is locked out after the user mistypes the password too many times.

  4. The IDS does not identify a buffer overflow.

Answer: A Explanation:

A false positive is an error in some evaluation process in which a condition tested for is mistakenly found to have been detected.

In spam filters, for example, a false positive is a legitimate message mistakenly marked as UBE -unsolicited bulk email, as junk email is more formally known. Messages that are determined to be spam – whether correctly or incorrectly – may be rejected by a server or client-side spam filter and returned to the sender as bounce e-mail.

One problem with many spam filtering tools is that if they are configured stringently enough to be effective, there is a fairly high chance of getting false positives. The risk of accidentally blocking an important message has been enough to deter many companies from implementing any anti-spam measures at all.

False positives are also common in security systems. A host intrusion prevention system (HIPS), for example, looks for anomalies, such as deviations in bandwidth, protocols and ports. When activity varies outside of an acceptable range – for example, a remote application attempting to open a normally closed port – an intrusion may be in progress. However, an anomaly, such as a sudden spike in bandwidth use, does not guarantee an actual attack, so this approach amounts to an educated guess and the chance for false positives can be high.

False positives contrast with false negatives, which are results indicating mistakenly that some condition tested for is absent.

Question No: 595 – (Topic 3)

A recent spike in virus detections has been attributed to end-users visiting www.compnay.com. The business has an established relationship with an organization using the URL of www.company.com but not with the site that has been causing the infections. Which of the following would BEST describe this type of attack?

  1. Typo squatting

  2. Session hijacking

  3. Cross-site scripting

  4. Spear phishing

Answer: A Explanation:

Typosquatting, also called URL hijacking or fake url, is a form of cybersquatting, and possibly brandjacking which relies on mistakes such as typographical errors made by Internet users when inputting a website address into a web browser. Should a user accidentally enter an incorrect website address, they may be led to any URL (including an alternative website owned by a cybersquatter).

The typosquatter#39;s URL will usually be one of four kinds, all similar to the victim site address:

(In the following, the intended website is quot;example.comquot;)

A common misspelling, or foreign language spelling, of the intended site: exemple.com A misspelling based on typing errors: xample.com or examlpe.com

A differently phrased domain name: examples.com A different top-level domain: example.org

Once in the typosquatter#39;s site, the user may also be tricked into thinking that they are in fact in the real site; through the use of copied or similar logos, website layouts or content.

Question No: 596 – (Topic 3)

Jane, a security administrator, has observed repeated attempts to break into a server. Which of the following is designed to stop an intrusion on a specific server?

  1. HIPS

  2. NIDS

  3. HIDS

  4. NIPS

Answer: A Explanation:

This question is asking which of the following is designed to stop an intrusion on a specific server. To stop an intrusion on a specific server, you would use a HIPS (Host Intrusion Prevention System). The difference between a HIPS and other intrusion prevention systems is that a HIPS is a software intrusion prevention systems that is installed on a ‘specific server’.

Intrusion prevention systems (IPS), also known as intrusion detection and prevention systems (IDPS), are network security appliances that monitor network and/or system activities for malicious activity. The main functions of intrusion prevention systems are to identify malicious activity, log information about this activity, attempt to block/stop it, and report it.

A HIPS (Host Intrusion Prevention System) is software installed on a host which monitors the host for suspicious activity by analyzing events occurring within that host with the aim of detecting and preventing intrusion.

Question No: 597 – (Topic 3)

A security administrator is aware that a portion of the company’s Internet-facing network tends to be non-secure due to poorly configured and patched systems. The business owner has accepted the risk of those systems being compromised, but the administrator wants to determine the degree to which those systems can be used to gain access to the company intranet. Which of the following should the administrator perform?

  1. Patch management assessment

  2. Business impact assessment

  3. Penetration test

  4. Vulnerability assessment

Answer: C Explanation:

Penetration testing is the most intrusive type of testing because you are actively trying to circumvent the system’s security controls to gain access to the system. It is also used to determine the degree to which the systems can be used to gain access to the company intranet (the degree of access to local network resources).

Penetration testing (also called pen testing) is the practice of testing a computer system, network or Web application to find vulnerabilities that an attacker could exploit.

Pen tests can be automated with software applications or they can be performed manually. Either way, the process includes gathering information about the target before the test (reconnaissance), identifying possible entry points, attempting to break in (either virtually or for real) and reporting back the findings.

The main objective of penetration testing is to determine security weaknesses. A pen test can also be used to test an organization#39;s security policy compliance, its employees#39; security awareness and the organization#39;s ability to identify and respond to security incidents.

Penetration tests are sometimes called white hat attacks because in a pen test, the good guys are attempting to break in.

Pen test strategies include: Targeted testing

Targeted testing is performed by the organization#39;s IT team and the penetration testing team working together. It#39;s sometimes referred to as a quot;lights-turned-onquot; approach because everyone can see the test being carried out.

External testing

This type of pen test targets a company#39;s externally visible servers or devices including domain name servers (DNS), e-mail servers, Web servers or firewalls. The objective is to find out if an outside attacker can get in and how far they can get in once they#39;ve gained access.

Internal testing

This test mimics an inside attack behind the firewall by an authorized user with standard access privileges. This kind of test is useful for estimating how much damage a disgruntled employee could cause.

Blind testing

A blind test strategy simulates the actions and procedures of a real attacker by severely limiting the information given to the person or team that#39;s performing the test beforehand. Typically, they may only be given the name of the company. Because this type of test can require a considerable amount of time for reconnaissance, it can be expensive.

Double blind testing

Double blind testing takes the blind test and carries it a step further. In this type of pen test, only one or two people within the organization might be aware a test is being conducted.

Double-blind tests can be useful for testing an organization#39;s security monitoring and incident identification as well as its response procedures.

Question No: 598 – (Topic 3)

Pete, the security administrator, has been notified by the IDS that the company website is under attack. Analysis of the web logs show the following string, indicating a user is trying to post a comment on the public bulletin board.

INSERT INTO message `lt;scriptgt;source=http://evilsitelt;/scriptgt; This is an example of which of the following?

  1. XSS attack

  2. XML injection attack

  3. Buffer overflow attack

  4. SQL injection attack

Answer: A Explanation:

The lt;scriptgt; lt;/scriptgt; tags indicate that script is being inserted.

Cross-site scripting (XSS) is a type of computer security vulnerability typically found in Web applications. XSS enables attackers to inject client-side script into Web pages viewed by other users.

Cross-site scripting uses known vulnerabilities in web-based applications, their servers, or plug-in systems on which they rely. Exploiting one of these, attackers fold malicious content into the content being delivered from the compromised site. When the resulting combined content arrives at the client-side web browser, it has all been delivered from the trusted source, and thus operates under the permissions granted to that system. By finding ways of injecting malicious scripts into web pages, an attacker can gain elevated access- privileges to sensitive page content, session cookies, and a variety of other information maintained by the browser on behalf of the user.

Question No: 599 – (Topic 3)

Pete’s corporation has outsourced help desk services to a large provider. Management has published a procedure that requires all users, when receiving support, to call a special number.

Users then need to enter the code provided to them by the help desk technician prior to allowing the technician to work on their PC. Which of the following does this procedure prevent?

  1. Collusion

  2. Impersonation

  3. Pharming

  4. Transitive Access

Answer: B Explanation:

Impersonation is where a person, computer, software application or service pretends to be someone or something it’s not. Impersonation is commonly non-maliciously used in client/server applications. However, it can also be used as a security threat.

The procedure the users have to go through is to ensure that the technician who will have access to the computer is a genuine technician and not someone impersonating a technician.

Question No: 600 – (Topic 3)

An employee connects a wireless access point to the only jack in the conference room to provide Internet access during a meeting. The access point is configured to use WPA2- TKIP. A malicious user is able to intercept clear text HTTP communication between the meeting attendees and the Internet. Which of the following is the reason the malicious user is able to intercept and see the clear text communication?

  1. The malicious user has access to the WPA2-TKIP key.

  2. The wireless access point is broadcasting the SSID.

  3. The malicious user is able to capture the wired communication.

  4. The meeting attendees are using unencrypted hard drives.

Answer: C Explanation:

In this question, the wireless users are using WPA2-TKIP. While TKIP is a weak encryption

protocol, it is still an encryption protocol. Therefore, the wireless communications between the laptops and the wireless access point are encrypted.

The question states that user was able to intercept ‘clear text’ HTTP communication between the meeting attendees and the Internet. The HTTP communications are unencrypted as they travel over the wired network. Therefore, the malicious user must have been able to capture the wired communication.

TKIP and AES are two different types of encryption that can be used by a Wi-Fi network. TKIP stands for “Temporal Key Integrity Protocol.” It was a stopgap encryption protocol introduced with WPA to replace the very-insecure WEP encryption at the time. TKIP is actually quite similar to WEP encryption. TKIP is no longer considered secure, and is now deprecated.

100% Dumps4cert Free Download!
Download Free Demo:SY0-401 Demo PDF
100% Dumps4cert Pass Guaranteed!
SY0-401 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.