[Free] 2018(June) Dumps4cert CompTIA N10-006 Dumps with VCE and PDF Download 101-110

By | July 4, 2018

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May CompTIA Official New Released N10-006
100% Free Download! 100% Pass Guaranteed!

CompTIA Network Certification

Question No: 101 – (Topic 4)

Two weeks after installation, a network technician is now unable to log onto any of the newly installed company switches. The technician suspects that a malicious user may have changed the switches#39; settings before they were installed in secure areas. Which of the following is the MOST likely way in which the malicious user gained access to the switches?

  1. Via SSH using the RADIUS shared secret

  2. Via HTTP using the default username and password

  3. Via console using the administrator#39;s password

  4. Via SNMP using the default RO community

Answer: B Explanation:

A new network switch is accessed via HTTP to perform the initial configuration. The username and password used is a factory default.

Question No: 102 – (Topic 4)

A technician has verified that a recent loss of network connectivity to multiple workstations is due to a bad CAT5 cable in the server room wall. Which of the following tools can be used to locate its physical location within the wall?

  1. Cable certifier

  2. Multimeter

  3. Cable tester

  4. Toner probe

Answer: D Explanation:

Toner probes are specifically used to trace cables hidden in floors, ceilings, or walls. They can alsobe used to track cables from the patch panels to their destinations.

Question No: 103 CORRECT TEXT – (Topic 4)

After recent changes to the pictured network, several users are unable to access the servers. Only PC1, PC2, PC3, and PC4 are clickable and will give you access to the command prompt and the adapter configuration tabs.

Instructions: Verify the settings by using the command prompt, after making any system changes. Next, restore connectivity by making the appropriate changes to the infrastructure. When you have completed these steps, select the Done button to submit.

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE


The default gateway must be on the same network as the nodes that use it. Therefore, the subnet on PC3 and the default gateway on PC4 must be modified.


Dulaney, Emmett and Mike Harwood, CompTIANetwork Authorized Exam Cram, Fourth Edition, Pearson, Indianapolis, 2012, p 101.


Question No: 104 – (Topic 4)

An administrator only has telnet access to a remote workstation. Which of the following utilities will identify if the workstation uses DHCP?

  1. tracert

  2. ping

  3. dig

  4. ipconfig

  5. netstat

Answer: D Explanation:

The ipconfig command displays the TCP/IP configuration of a Windows system. The ipconfig /all command displays the system’s TCP/IPconfiguration in detail. This output includes whether DHCP is enabled or not.

Question No: 105 – (Topic 4)

A network engineer is troubleshooting an issue with a computer that is unable to connect to the Internet. The network engineer analyzes the following output from a command line utility:

Network DestinationNetmask GatewayInterface

Which of the following is the reason for the computer issue, given the above output?

  1. Wrong default gateway netmask

  2. Incorrect default gateway address

  3. Default gateway on the wrong interface

  4. Missing default gateway

Answer: D Explanation:

The output appears to be a result of running the netstat -r command. If the default gateway was present, the first line would show the Network Destination as and the Netmaskas

Question No: 106 – (Topic 4)

A network technician is using a network monitoring system and notices that every device on a particular segment has lost connectivity. Which of the following should the network technician do NEXT?

  1. Establish a theory of probable cause.

  2. Document actions and findings.

  3. Determine next steps to solvethe problem.

  4. Determine if anything has changed.

    Answer: D Explanation:

    The technician has already identified the symptom: Loss of connectivity on a specific network segment. The next step in identifying the problem is to “Determine if anything haschanged”.

    Common troubleshooting steps and procedures:

    1. Identify the problem. Information gathering. Identify symptoms. Question users.

      Determine if anything has changed.

    2. Establish a theory of probable cause. Question the obvious.

    3. Test the theoryto determine cause:

      When the theory is confirmed, determine the next steps to resolve the problem. If theory is not confirmed, re-establish a new theory or escalate.

    4. Establish a plan of action to resolve the problem and identify potential effects.

    5. Implement the solution or escalate as necessary.

    6. Verify full system functionality and if applicable implement preventive measures.

    7. Document findings, actions, and outcomes.

      Question No: 107 – (Topic 4)

      A network administrator recently installed a web proxy server at a customer#39;s site. The following week, a system administrator replaced the DNS server overnight. The next day, customers began having issues accessing public websites. Which of the following will resolve the issue?

      1. Update the DNS server with the proxy server information.

      2. Implement a split horizon DNS server.

      3. Reboot the web proxy and then reboot the DNS server.

      4. Put the proxy server on the other side of the demarc.

Answer: A Explanation:

Proxy servers act as an intermediary for requests from clients seeking resourcesfrom other servers. If the DNS server is not communicating with the proxy server, these requests are not forwarded. Therefore, updating the DNS server with the proxy server information will solve the problem.

Question No: 108 – (Topic 4)

A network technician is troubleshooting a problem at a remote site. It has been determined that the connection from router A to router B is down. The technician at the remote site re- terminates the CAT5 cable that connects the two routers as a straight through cable. The cable is then tested and is plugged into the correct interface. Which of the following would be the result of this action?

  1. The normal amount of errors and the connection problem has been resolved.

  2. The interface status will indicate that the port is administratively down.

  3. The traffic will flow,but with excessive errors.

  4. The interface status will show line protocol down.

Answer: D Explanation:

Devices of different types are connected with a straight through cable (patch cable). In this case, it is used to connect two devices of the same type. It is for this reason that the interface will display the line protocol down status.

Question No: 109 – (Topic 4)

Ann, a user, is experiencing an issue with her wireless device. While in the conference area, the wireless signal is steady and strong. However, at her desk the signal is consistently dropping, yet the device indicates a strong signal. Which of the following is the MOST likely cause of the issue?

  1. Signal-to-noise ratio

  2. AP configuration

  3. Incorrect SSID

  4. Bounce

Answer: D Explanation:

The signal between the access point and Ann’s wireless device is being bounced off walls, windows, glass mirrors, carpeted floors, and many other objects. This results in the slow connection. The radio waves are travelling at the same rate, but as a result of signal bounce, it#39;s taking longer to reach its destination.

Question No: 110 – (Topic 4)

After connecting a workstation directly to a small business firewall, a network administrator is trying to manage it via HTTPS without losing its stored configuration. The only two pieces of information that the network administrator knows about the firewall are the management interface MAC address, which is 01:4a:d1:fa:b1:0e, and the administrator#39;s password.

Which of the following will allow the administrator to log onto the firewall via HTTPS if the management#39;s IP address is unknown and the administrator#39;s workstation IP address is

  1. Use the reset button on the back of the firewall to restore it to its factory default, and then log onto

  2. Run the following command on the administrator#39;s workstation: arp -s 01:4a:d1:fa:b1:0e

  3. Use an SNMP tool to query the firewall properties and determine the correct management IP address

  4. Use a crossover cable to connect to the console port and reconfigure the firewall management IP to

Answer: B Explanation:

Address Resolution Protocol (ARP) is used to resolve IP addresses to MAC addresses. The arp -s command addsa static permanent address to the ARP cache. This will allow the administrator to access the firewall.

100% Dumps4cert Free Download!
Download Free Demo:N10-006 Demo PDF
100% Dumps4cert Pass Guaranteed!
N10-006 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.