[Free] 2018(June) Dumps4cert CompTIA N10-006 Dumps with VCE and PDF Download 161-170

By | July 4, 2018

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May CompTIA Official New Released N10-006
100% Free Download! 100% Pass Guaranteed!

CompTIA Network Certification

Question No: 161 – (Topic 6)

An administrator’s router with multiple interfaces uses OSPF. When looking at the router’s status, it is discovered that one interface is not passing traffic.

Given the information below, which of the following would resolve this issue?


Fast Ethernet 0 is up, line protocol is down Int ip address is

MTU 1500 bytes, BW10000 kbit, DLY 100 usec Reliability 255/255, Tx load 1/255, Rx load 1/255 Encapsulation ospf, loopback not set

Keep alive 10

Full duplex, 100Mb/s, 100 Base Tx/Fx Received 1052993 broadcasts

0 input errors

0 packets output, 0 bytes

0 output errors, 0 collisions, 0 resets

  1. Set the loopback address

  2. Enable the connecting port

  3. Put the IP address in the right broadcast domain

  4. Replace the line card

  5. Set OSPF to area 0

Answer: B

Question No: 162 – (Topic 6)

Which of the following default ports is associated with protocols that are connectionless?

A. 80 B. 443 C. 2427 D. 3389

Answer: C

Question No: 163 – (Topic 6)

A technician is testing a new web-based tool capable of generating automatic teller machine (ATM) cash and service availability reports. The web-based tool was developed by a consortium of financial institutions. Which of the following cloud delivery models and technologies are being utilized? (Select two.)

  1. SaaS

  2. Public

  3. Community

  4. PaaS

  5. Private

  6. IaaS

Answer: C,E

Question No: 164 – (Topic 6)

A network technician is connecting three temporary office trailers with a point-to-multipoint microwave radio solution in a wooded area. The microwave radios are up and the network technician can ping devices in all office trailers, however, connectivity is sporadic. Which of the following is MOST likely the cause of this issue?

  1. Latency

  2. Throttling

  3. Interference

  4. Split horizon

Answer: C

Question No: 165 – (Topic 6)

QoS operates at which of the following OSI model layers? (Select TWO)

  1. Layer 1

  2. Layer 2

  3. Layer 3

  4. Layer 4

  5. Layer 5

Answer: B,C

Question No: 166 – (Topic 6)

An organization is required to implement a wireless network. The organization must implement wireless routers compatible with 802.11ac protocol that have maximum possible range. Which of the following wireless router frequencies is a viable option?

  1. 2.4GHz

  2. 3.7GHz

  3. 5.0GHz

  4. 6.0GHz

Answer: A

Question No: 167 – (Topic 6)

Which of the following transmission methods is used for network utilizing the 802.3 standard?

  1. MAC

  2. Synchronous

  3. DSSS

  4. Broadband

  5. Baseband

Answer: A

Question No: 168 – (Topic 6)

A network administrator is configuring a VLAN across multiple switches. The administrator wants to configure the VLAN once and have that configuration propagate to all of the switches in the network. Which of the following should the administrator do?

  1. Configure the switches to utilize STP

  2. Implement port bonding on the switches

  3. Configure the switches to utilize VTP

  4. Configure the switches to utilize IGRP

Answer: C

Question No: 169 – (Topic 6)

Which of the following protocols is considered a hybrid routing protocol?

  1. OSPF

  2. RIPv2

  3. IS-IS

  4. BGP

  5. EIGRP

Answer: E

Question No: 170 – (Topic 6)

Which of the following protocols were designed to avoid loops on a Layer 2 network? (Select TWO)

  1. OSPF

  2. RIPv2

C. 802.1q

D. Spanning tree

E. 802.1d

F. QoS

Answer: D,E

100% Dumps4cert Free Download!
Download Free Demo:N10-006 Demo PDF
100% Dumps4cert Pass Guaranteed!
N10-006 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.