[Free] 2018(June) Dumps4cert Microsoft 70-765 Dumps with VCE and PDF Download 161-170

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Microsoft Official New Released 70-765
100% Free Download! 100% Pass Guaranteed!

Installing and Configuring Windows Server 2012

Question No: 161 – (Topic 2)

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

Ensurepass 2018 PDF and VCE

VM3 is used to test applications.

You need to prevent VM3 from synchronizing its clock to Server1. What should you configure?

  1. NUMA topology

  2. Resource control

  3. Resource metering

  4. Virtual Machine Chimney

  5. The VLAN ID

  6. Processor Compatibility

  7. The startup order

  8. Automatic Start Action

  9. Integration Services

  10. Port mirroring

  11. Single-root I/O visualization

Answer: I Explanation:

Integration Services settings on virtual machines includes services such as operating system shutdown, time synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you should disable the time synchronization using Integration

Services.

References:

http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual- machines.aspx

Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144

Question No: 162 HOTSPOT – (Topic 2)

Your network contains a subnet named Subnet1. Subnet1 contains a DHCP server named Server1.

You deploy a new subnet named Subnet2. On Subnet2, you deploy a new server named Server2 that runs Windows Server 2012 R2.

You need to configure Server2 to route DHCP broadcast from Subnet2 to Server1. Which server role should you install on Server2?

To answer, select the appropriate role in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

In Windows Server 2012 R2 the DirectAccess feature and the RRAS role service were combined into a new unified server role. This new Remote Access server role allows for centralized administration, configuration, and monitoring of both DirectAccess and VPN- based remote access services. Additionally, Windows Server 2012 R2 DirectAccess provided multiple updates and improvements to address deployment blockers and provide simplified management.

References: http://technet.microsoft.com/library/hh831416 http://technet.microsoft.com/en-us/library/cc732263.aspx

Question No: 163 – (Topic 2)

Your network contains a production Active Directory forest named contoso.com and a test

Active Directory forest named contoso.test. A trust relationship does not exist between the forests.

In the contoso.test domain, you create a backup of a Group Policy object (GPO) named GPO1.

You transfer the backup of GPO1 to a domain controller in the contoso.com domain.

You need to create a GPO in contoso.com based on the settings of GPO1.You must achieve this goal by using the minimum amount of Administrative effort.

What should you do?

  1. From Windows PowerShell, run the Get- GPO cmdlet and the Copy- GPO cmdlet.

  2. From Windows PowerShell, run the New- GPO cmdlet and the Import- GPO cmdlet.

  3. From Group Policy Management, create a new starter GPO. Right-click the new starter GPO, and then click Restore from Backup.

  4. From Group Policy Management, right-click the Croup Policy Objects container, and then click Manage Backups.

Answer: B Explanation:

  1. Copy-GPO requires domain trust / copy from one domain to another domain within the same forest.

  2. The Import-GPO cmdlet imports the settings from a GPO backup into a specified target GPO. The target GPO can be in a different domain or forest than that from which the backup was made and it does not have to exist prior to the operation.

  3. This would create a starter GPO, not a GPO.

D: You can also restore GPOs. This operation takes a backed-up GPO and restores it to the same domain from rom the GPO’s original which it was backed up. You cannot restore a GPO from backup into a domain different f domain.

The New-GPO cmdlet creates a new GPO with a specified name. By default, the newly created GPO is not linked to a site, domain, or organizational unit (OU). The Import-GPO cmdlet imports the settings from a GPO backup into a specified target GPO. The target GPO can be in a different domain or forest than that from which the backup was made and it does not have to exist prior to the operation.

The Restore-GPO cmdlet restores a GPO backup to the original domain from which it was saved. If the original domain is not available, or if the GPO no longer exists in the domain, the cmdlet fails.

Since the GPO’s original domain is different and there is no trust relationship between forests, you should execute the New-GPO command and import the already existing command into the ‘new’ domain.

Question No: 164 – (Topic 2)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.

You need to ensure that a user named User1 can install Windows features on VM1. The solution must minimize the number of permissions assigned to User1.

To which group should you add User1?

  1. Hyper-V Administrators on Server1

  2. Administrators on VM1

  3. Server Operators on Server1

  4. Power Users on VM1

Answer: B Explanation:

The user has to be an administrator on VM1 to be able to install features.

In Windows Server 2012 R2, the Server Manager console and Windows PowerShell- cmdlets for

Server Manager allow installation of roles and features to local or remote servers, or offline virtual hard disks (VHDs).

You can install multiple roles and features on a single remote server or offline VHD in a single Add Roles and Features Wizard or Windows PowerShell session. You must be logged on to a server as an administrator to install or uninstall roles, role services, and features. If you are logged on to the local computer with an account that does not have administrator rights on your target server, right-click the target server in the Servers tile, and then click Manage As to provide an account that has administrator rights. The server on which you want to mount an offline VHD must be added to Server Manager, and you must have Administrator rights on that server.

References:

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10: Implementing Group Policy, p.539

Question No: 165 – (Topic 2)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.

You need to create a 3-TB virtual hard disk (VHD) on Server1. Which tool should you use?

  1. Computer Management

  2. Server Manager

  3. Share and Storage Management

  4. New-VirtualDisk

Answer: A Explanation:

For other questions to create a VHD (file) you can use computer management.

  • Share and storage management (2008 only)

  • New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)

  • Server Manager (you would use this to create virtual disks, not virtual hard disks)

Question No: 166 HOTSPOT – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

You need to implement NIC teaming on Server1.

Which two network connections should you include on the NIC team? (To answer, select the two appropriate network connections in the answer area.)

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

NIC Teaming requires the presence of a single Ethernet network adapter, which can be used for separating traffic that is using VLANs. All modes that provide fault protection

through failover require at least two Ethernet network adapters. NIC1 is already enabled, thus you should include NIC2 and NIC3.

Question No: 167 – (Topic 2)

Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.

You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

The DHCP clients in Subnet1 can connect to the client computers in Subnet2 by using an IP address or a FQDN.

You discover that the DHCP clients in Subnet2 can connect to client computers in Subnet1 by using an IP address only.

You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.

What should you add?

  1. The 015 DNS Domain Name option to Subnet1

  2. The 015 DNS Domain Name option to Subnet2

  3. The 006 DNS Servers option to Subnet2

  4. The 006 DNS Servers option to Subnet1

Answer: C Explanation: References:

http://technet.microsoft.com/en-us/library/ee941136(v=WS.10).aspx

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, p.253

Question No: 168 – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

The disks on Server1 are configured as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You create a virtual machine on Server1.

You need to ensure that you can configure a pass-through disk for the virtual machine. What should you do?

  1. Convert Disk 1 to a GPT disk.

  2. Delete partition E.

  3. Convert Disk 1 to a dynamic disk.

  4. Take Disk 1 offline.

Answer: D Explanation: References:

Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 3.2: Create and Configure virtual machine storage, Chapter 3: p. 159

Exam Ref 70-410: Installing and Configuring Server 2012: Objective 1.3: Installing and Configuring servers, Chapter 1: p. 42-43 http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in- hyper-v.aspx

Question No: 169 – (Topic 2)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.

On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2. You join Server2 to the contoso.com domain.

You need to ensure that you can manage Server2 by using the Computer Management console on Server1.

What should you do on Server2?

  1. Install Windows Management Framework.

  2. Run sconfig.exe and configure Remote Server Administration Tools (RSAT).

  3. Install Remote Server Administration Tools (RSAT).

  4. Run sconfig.exe and configure remote management.

Answer: D Explanation:

In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.

References:

http://technet.microsoft.com/en-us/library/jj647766.aspx

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80

Question No: 170 – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2. You need to enable access-based enumeration for a file share on Server1. Which tool should you use?

  1. File Server Resource Manager (FSRM)

  2. Share and Storage Management

  3. Server Manager

  4. File Explorer

Answer: C Explanation:

Access-based enumeration displays only the files and folders that a user has permissions to access. It is a feature that was previously available as a downloadable package for the Windows Server庐 2003 operating system (it was also included in Windows Server 2003 Service Pack 1). Access-based enumeration is now included in the Windows Server 2008 operating system, and you can enable it by using Share and Storage Management.

Ensurepass 2018 PDF and VCE

100% Dumps4cert Free Download!
Download Free Demo:70-765 Demo PDF
100% Dumps4cert Pass Guaranteed!
70-765 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.