[Free] 2018(June) Dumps4cert Microsoft 70-765 Dumps with VCE and PDF Download 251-260

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Microsoft Official New Released 70-765
100% Free Download! 100% Pass Guaranteed!

Installing and Configuring Windows Server 2012

Question No: 251 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. The domain contains a user account named User1 that resides in an organizational unit (OU) named OU1.

A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to publish several applications to a user named User1.

In the Users container, you create a new user named User2.

You need to ensure that the same applications are published to User2. What should you do?

  1. Modify the settings in GPO1.

  2. Move User2 to OU1

  3. Link a WMI filter to GPO1.

  4. Modify the security of GPO1.

Answer: B Explanation:

Moving User2 to OU1 will give him the same access as User1.

The GPO is linked to OU1. By moving User2 to OU1 the GPO will be applied to this user.

Question No: 252 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers.

The domain controllers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

In the perimeter network, you install a new server named Server1 that runs Windows Server 2012 R2. Server1 is in a workgroup.

You need to perform an offline domain join of Server1 to the contoso.com domain. What should you do first?

  1. Transfer the PDC emulator role to Dc1.

  2. Run the djoin.exe command.

  3. Run the dsadd.exe command.

  4. Transfer the infrastructure master role to DC1.

Answer: B Explanation:

  1. Creates a new Active Directory computer.

  2. Use djoin for offline join in the perimeter network

  3. Adds specific types of objects to the directory.

  4. Add the local computer to a domain or workgroup.

Question No: 253 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.

You have a virtual machine named VM1. VM1 has a checkpoint. You need to modify the Checkpoint File Location of VM1.

What should you do first?

  1. Copy the checkpoint file.

  2. Delete the checkpoint.

  3. Shut down VM1.

  4. Pause VM1.

Answer: B

Question No: 254 – (Topic 3)

You have a domain controller named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed. Server1 hosts a DNS zone named contoso.com and a GlobalNames zone.

You discover that the root hints were removed from Server1. You need to view the default root hints of Server1.

Which file should you open?

  1. Netlogon.dns

  2. Cache.dns

  3. Globalnames.dns

  4. Place.dns

Answer: B Explanation:

DNS Server service implements root hints using a file, Cache.dns, stored in the systemroot\System32\Dns folder on the server. Thus viewing the Cache.dns file will show the root hints.

Question No: 255 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. The domain

contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.

You create an external virtual switch named Switch1. Switch1 has the following configurations:

->Connection type: External network

->Single-root I/O virtualization (SR-IOV): Enabled

->Ten virtual machines connect to Switch1.

You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines.

What should you do?

  1. Remove Switch1 and recreate Switch1 as an internal network.

  2. Change the Connection type of Switch1 to Private network.

  3. Change the Connection type of Switch1 to Internal network.

  4. Remove Switch1 and recreate Switch1 as a private network.

Answer: D Explanation:

You cannot change the type of vswitch from external to private when SR-IOV is enabled at vswitch creation -gt;you need to recreate the vswitch.

Question No: 256 – (Topic 3)

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1.

You need to ensure that VM1 can start by using PXE. What should you do?

  1. Add a second network adapter, and then run the Set-VMNetworkAdaptercmdlet.

  2. Add a second network adapter, and then configure network adapter teaming.

  3. Remove the network adapter, and then run the Set-VMNetworkAdaptercmdlet.

  4. Remove the network adapter, and then add a legacy network adapter.

Answer: D

Question No: 257 – (Topic 3)

You have a server named Server1 that has a Server Core installation of Windows Server 2008 R2.

Server1 has the DHCP Server server role and the File Server server role installed.

You need to upgrade Server1 to Windows Server 2012 R2 with the graphical user interface (GUI).

The solution must meet the following requirements:

->Preserve the server roles and their configurations.

->Minimize administrative effort.

What should you do?

  1. On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server with a GUI.

  2. Start Server1 from the Windows Server 2012 R2 installation media and select Server Core Installation.

    When the installation is complete, add the Server Graphical Shell feature.

  3. Start Server1 from the Windows Server 2012 R2 installation media and select Server with a GUI.

  4. On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server Core Installation.

When the installation is complete, add the Server Graphical Shell feature

Answer: D Explanation:

  1. Server is on 2008 R2 core, must install 2012 R2 core and then GUI

  2. Not least effort

  3. Not least effort

  4. Upgrade to 2012 R2 and install GUI shell

http://technet.microsoft.com/en-us/library/jj574204.aspx Upgrades that switch from a

Server Core installation to the Server with a GUI mode of Windows Server 2012 R2 in one step (and vice versa) are not supported.

However, after upgrade is complete, Windows Server 2012 R2 allows you to switch freely between Server Core and Server with a GUI modes.

Question No: 258 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a member server named Server1. Server1 has the File Server server role installed.

On Server1, you create a share named Documents. The Documents share will contain the files and folders of all users.

You need to ensure that when the users connect to Documents, they only see the files to which they have access.

What should you do?

  1. Enable access-based enumeration.

  2. Configure Dynamic Access Control.

  3. Modify the Share permissions.

  4. Modify the NTFS permissions.

Answer: A Explanation:

Access-based Enumeration is a new feature included with Windows Server 2003 Service Pack 1. This feature allows users of Windows Server 2003-Based file servers to list only the files and folders to which they have access when browsing content on the file server. This eliminates user confusion that can be caused when users connect to a file server and encounter a large number of files and folders that they cannot access. Access-based Enumeration filters the list of available files and folders on a server to include only those that the requesting user has access to. This change is important because this allows users to see only those files and directories that they have access to and nothing else. This mitigates the scenario where unauthorized users might otherwise be able to see the contents of a directory even though they don’t have access to it.

Access-Based Enumeration (ABE) can be enabled at the Share properties through Server Manager

References:

Exam Ref 70-410: Installing and configuring Windows Server 2012 R2, Chapter 2: Configure server roles and features, Objective 2.1: Configure file and share access, p. 75- 80.

Question No: 259 HOTSPOT – (Topic 3)

You have a server named Server1. Server1 runs Windows Server 2012 R2. A user named Admin1 is a member of the local Administrators group.

You need to ensure that Admin1 receives a User Account Control (UAC) prompt when attempting to open Windows PowerShell as an administrator.

Which setting should you modify from the Local Group Policy Editor? To answer, select the appropriate setting in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Local Group Policy Editor is a Microsoft Management Console (MMC) snap-in that is used to configure and modify Group Policy settings within Group Policy Objects (GPOs).

Administrators need to be able to quickly modify Group Policy settings for multiple users and computers throughout a network environment. The Local Group Policy Editor provides administrators with a hierarchical tree structure for configuring Group Policy settings in GPOs. These GPOs can then be linked to sites, domains, and organizational units (OU) that contain computer or user objects.To work efficiently, administrators need to have immediate access to information about the function and purpose of individual policy settings. For Administrative Templates policy settings, Local Group Policy Editor provides information about each policy setting directly in the web view of the console. This information shows operating system requirements, defines the policy setting, and includes any specific details about the effect of enabling or disabling the policy setting.

Question No: 260 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a server named Server1.

You install the Windows PowerShell Web Access gateway on Server1.

You need to provide administrators with the ability to manage the servers in the domain by using the Windows PowerShell Web Access gateway.

Which two cmdlets should you run on Server1? (Each correct answer presents part of the solution. Choose two.)

  1. Set-WSManQuickConfig

  2. Set-WSManInstance

  3. Add-PswaAuthorizationRule

  4. Set-BCAuthentication

  5. Install-PswaWebApplication

Answer: C,E Explanation:

  1. Configures the local computer for remote management.

  2. Modifies the management information that is related to a resource.

  3. Adds a new authorization rule to the Windows PowerShell Web Access authorization rule set.

  4. Specifies the BranchCache computer authentication mode.

  5. Configures the Windows PowerShell 庐 Web Access web Application in IIS.

100% Dumps4cert Free Download!
Download Free Demo:70-765 Demo PDF
100% Dumps4cert Pass Guaranteed!
70-765 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.