[Free] 2018(June) Dumps4cert Microsoft 70-767 Dumps with VCE and PDF Download 281-290

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Microsoft Official New Released 70-767
100% Free Download! 100% Pass Guaranteed!

Installing and Configuring Windows Server 2012

Question No: 281 HOTSPOT – (Topic 3)

Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server2 has the Windows Deployment Services server role installed.

On Server1, you have a virtual machine named VM1.

You plan to deploy an image to VM1 by using Windows Deployment Services (WDS). You need to ensure that VM1 can connect to Server1 by using PXE.

Which settings should you configure on VM1? To answer, select the appropriate settings in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Virtual machines can be deployed to Hyper-V using Windows Deployment Services (WDS). To accomplish this requires the proper WDS infrastructure be in place and that the VM PXE boot using a Legacy Network Adapter.

By default, there is only a “Standard Network Adapter” installed on the Virtual Machine, but for PXE functionality you will need to add a “Legacy Network Adapter”.

Go to the “Legacy Network Adapter” that you just added and specify that it should use the Virtual Switch that you just created.

Last but not least, you should change the BIOS boot priority to make sure that the Virtual Machine always tries to boot first using the “Legacy Network Adapter”. Just select the “Legacy Network Adapter” and move it to the top using the buttons.

Start your Virtual Machine and now PXE boot should work.

The Pre-Boot Execution Environment (PXE) provider for Windows Deployment Services provides client boot services over the network. It registers itself with the WDS Server service (the main server-side service of the Windows Deployment Services solution) and

requests a remote procedure call (RPC) endpoint.

After the Windows Deployment Services server role is installed, you must configure the server by using either the Windows Deployment Services MMC snap-in or the /Initialize- Server command-line option. The PXE provider must be configured properly before it can provide client boot services over the network.

References:

http://technet.microsoft.com/en-us/library/cc726550(v=WS.10).aspx

Question No: 282 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. You need to ensure that the local Administrator account on all computers is renamed to L_Admin. Which Group Policy settings should you modify?

  1. Security Options

  2. User Rights Assignment

  3. Restricted Groups

  4. Preferences

Answer: A

Question No: 283 – (Topic 3)

Your network contains an Active Directory domain named adatum.com. The domain contains three domain controllers.

The domain controllers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

DC3 loses network connectivity due to a hardware failure. You plan to remove DC3 from the domain.

You log on to DC3.

You need to identify which service location (SRV) records are registered by DC3. What should you do?

  1. Open the %windir%\system32\config\netlogon.dns file.

  2. Run dcdiag /test:dns

  3. Open the %windir%\system32\dns\backup\adatum.com.dns file.

  4. Run ipconfig /displaydns.

Answer: A Explanation:

  1. Netlogon service creates a log file that contains all the locator resource records and places the logfile in the following location:

  2. Analyzes the state of domain controllers in a forest or enterprise and reports any problems to help introubleshooting.

  3. dns backup file

  4. used to display current resolver cache content You can verify SRV locator resource records by viewing netlogon.dns, located in the %systemroot%\System32\Config folder. The SRV record is a Domain Name System (DNS) resource record that is used to identify computers that host specific services.

SRV resource records are used to locate domain controllers for Active Directory. You can use Notepad, to view this file.

The first record in the file is the domain controller’s Lightweight Directory Access Protocol (LDAP) SRV record.

This record should appear similar to the following: _ldap._tcp.Domain_Name

Question No: 284 – (Topic 3)

Your network contains two subnets. The subnets are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You have a server named Server1 that runs Windows Server 2012 R2. Server1 is connected to LAN1.

You run the route print command as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that Server1 can communicate with the client computers on LAN2. What should you do?

  1. Change the default gateway address.

  2. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.

  3. Change the metric of the 10.10.1.0 route.

  4. Set the state of the Teredo interface to disable.

Answer: A Explanation:

The exhibit shows the default gateway address to be that of LAN1. This should be changed to the LAN2 gateway address to allow client computers access on LAN2.

In general, the first and last addresses in a subnet are used as the network identifier and broadcast address, respectively. All other addresses in the subnet can be assigned to hosts on that subnet. For example, IP addresses of networks with subnet masks of at least 24 bits ending in .0 or .255 can never be assigned to hosts. Such “last” addresses of a subnet are considered “broadcast” addresses and all hosts on the corresponding subnet will respond to it. Theoretically, there could be situations where you can assign an address ending in .0: for example, if you have a subnet like 192.168.0.0/255.255.0.0, you are allowed to assign a host the address 192.168.1.0. It could create confusion though, so it’s not a very common practice.

Example10.6.43.0 with subnet 255.255.252.0 (22 bit subnet mask) means subnet ID 10.6.40.0, a host address range from 10.6.40.1 to 10.6.43.254 and a broadcast address10.6.43.255. So in theory, your example 10.6.43.0 would be allowed as a valid host address. The default gateway address should not end in .0 with the /24 address.

References:

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 4: Deploying domain controllers, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 254-256

Question No: 285 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. The domain contains an application server named Server1. Server1 runs Windows Server 2012 R2.

You have a client application named App1 that communicates to Server1 by using dynamic TCP ports.

On Server1, a technician runs the following command:

New-NetFirewallRule -DisplayNameAllowDynamic -Direction Outbound -LocalPort 1024- 65535 -Protocol TCP. Users report that they can no longer connect to Server1 by using Appl.

You need to ensure that App1 can connect to Server1. What should you run on Server1?

  1. Set-NetFirewallRule -DisplayNameAllowDynamic -Action Allow

  2. netshadvfirewall firewall add rule name=allowdynamic action-allow

  3. netshadvfirewall firewall set rule name-allowdynamic new action- allow

  4. Set-NetFirewallRule -DisplayNameAllowDynamic -Direction Inbound

Answer: D Explanation:

When using the using the Windows Firewall with Advanced Security console. You can select the Inbound Rules node and scroll down in the list, you can see nine different Network Discovery rules. The Direction Inbound rule is the rule that will allow App1 to connect to Server1.

Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 6: Create and manage Group Policy, Objective 6.4: Configure Windows Firewall, p. 348

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 269

Question No: 286 – (Topic 3)

You have two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. The servers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

The routing table for Server1 is shown in the Routing Table exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

From Server1, you attempt to ping Server2, but you receive an error message as shown in the Error exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that you can successfully ping Server2 from Server1.

What should you do on Server1?

  1. Disable Windows Firewall.

  2. Modify the subnet mask.

  3. Modify the DNS settings.

  4. Modify the default gateway settings.

Answer: D Explanation:

Route is used to view and modify the IP routing table.

Route Print displays a list of current routes that the host knows. Default gateways are important to make IP routing work efficiently. TCP/IP hosts rely on default gateways for most of their communication needs with hosts on remote network segments. In this way, individual hosts are freed of the burden of having to maintain extensive and continuously updated knowledge about individual remote IP network segments. Only the router that acts as the default gateway needs to maintain this level of routing knowledge to reach other remote network segments in the larger inter network. In order for Host A on Network 1 to communicate with Host B on Network 2, Host A first checks its routing table to see if a specific route to Host B exists. If there is no specific route to Host B, Host A forwards its TCP/IP traffic for Host B to its own default gateway, IP Router 1.

The Default Gateway specifies the IP address of a router on the local subnet, which the system will use to access destinations on other networks. If the default gateway settings are not properly configured, then there can be no successful connection.

Reference:

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 269

Question No: 287 – (Topic 3)

Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.

Ensurepass 2018 PDF and VCE

You need to ensure that you can use Server Manager on DC1 to manage DC2.

Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

  1. Install Microsoft .NET Framework 4 on DC2.

  2. Install Remote Server Administration Tools on DC1.

  3. Install the Windows PowerShell 2.0 engine on DC1.

  4. Install Remote Server Administration Tools on DC2.

  5. Install Windows Management Framework 3.0 on DC2.

Answer: A,E Explanation:

In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool.

You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems.

Windows Management Framework 3.0. To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers.

Reference:

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80

Question No: 288 HOTSPOT – (Topic 3)

Your network contains an Active Directory domain named contoso.com.

Technicians use Windows Deployment Services (WDS) to deploy Windows Server 2012 R2.

The network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

You need to ensure that you can use WDS to deploy Windows Server 2012 R2 to a virtual machine named VM1.

Which settings should you configure?

To answer, select the appropriate settings in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

WDS Allows network-based installation of Windows operating systems, which reduces the complexity and cost when compared to manual installations. Thus you should configure the appropriate network settings.

Question No: 289 – (Topic 3)

Your network contains an Active Directory domain named adatum.com. The domain contains a file server named Server2 that runs Windows Server 2012 R2. Server2 contains a shared folder named Home. Home contains the home folder of each user.

All users have the necessary permissions to access only their home folder.

A user named User1 opens the Home share as shown in the exhibit. (Click the Exhibit

button.)

Ensurepass 2018 PDF and VCE

You need to ensure that all users see only their own home folder when they access Home. What should you do from Server2?

  1. From Windows Explorer, modify the properties of Home.

  2. From Server Manager, modify the properties of the volume that contains Home.

  3. From Windows Explorer, modify the properties of the volume that contains Home.

  4. From Server Manager, modify the properties of Home.

    Answer: D Explanation:

    Access-based Enumeration is a new feature included with Windows Server 2003 Service Pack 1. This feature based file servers to list only the files and folders to which they have allows users of Windows Server 2003 access when browsing content on the file server. This eliminates user confusion that can be caused when users connect to a file server and encounter a large number of files and folders that they cannot access.

    Access-based Enumeration filters the list of available files and folders on a server to include only those that the requesting user has access to. This change is important because this allows users to see only those files and directories that they have access to and nothing else. This mitigates the scenario where unauthorized users might otherwise be able to see the contents of a directory even though they don’t have access to it.

    Question No: 290 HOTSPOT – (Topic 3)

    Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8.

    An administrator creates an application control policy and links the policy to an organizational unit (OU) named OU1. The application control policy contains several deny rules. The deny rules apply to the Everyone group.

    You need to prevent users from running the denied application. What should you configure?

    To answer, select the appropriate object in the answer area.

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Ensurepass 2018 PDF and VCE

    To enable the Enforce rules enforcement setting by using the Local Security Policy snap-in

    1. Click Start, type secpol.msc in the Search programs and files box, and then press ENTER.

    2. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.

    3. In the console tree, double-click Application Control Policies, right-click AppLocker, and then click Properties.

    4. On the Enforcement tab, select the Configured check box for the rule collection that you want to enforce, and then verify that Enforce rules is selected in the list for that rule collection.

    5. Repeat step 4 to configure the enforcement setting to Enforce rules for additional rule collections.

    6. Click OK.

You should apply an application control policy for executable rules. When AppLocker policies from various GPOs are merged, both the rules and the enforcement modes are merged. The most similar Group Policy setting is used for the enforcement mode, and all rules from linked GPOs are applied.

References:

Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 6: Create and Manage Group Policy, Objective 6.2: Local Users and Groups, p. 329. http://technet.microsoft.com/en-us/library/dd759115.aspx

100% Dumps4cert Free Download!
Download Free Demo:70-767 Demo PDF
100% Dumps4cert Pass Guaranteed!
Download 2018 Dumps4cert 70-767 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.