[Free] 2018(June) Dumps4cert Microsoft 70-980 Dumps with VCE and PDF Download 51-60

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Microsoft Official New Released 70-980
100% Free Download! 100% Pass Guaranteed!

Configuring Advanced Windows Server 2012 R2 Services

Question No: 51 – (Topic 1)

You have a server named Server1 that runs Windows Server 2012 R2 and is used for testing.

A developer at your company creates and installs an unsigned kernel-mode driver on Server1. The developer reports that Server1 will no longer start.

You need to ensure that the developer can test the new driver. The solution must minimize the amount of data loss.

Which Advanced Boot Option should you select?

  1. Disable Driver Signature Enforcement

  2. Disable automatic restart on system failure

  3. Last Know Good Configuration (advanced)

  4. Repair Your Computer

Answer: A Explanation:

A. By default, 64-bit versions of Windows Vista and later versions of Windows will load a kernel-mode driver only if the kernel can verify the driver signature. However, this default behavior can be disabled to facilitate early driver development and non-automated testing.

Ensurepass 2018 PDF and VCE

Incorrect:

Not B. specifies that Windows automatically restarts your computer when a failure occurs. Not C. Developer would not be able to test the driver as needed.

Not D. Removes or repairs critical windows files, Developer would not be able to test the driver as needed and some file loss.

Reference: Installing Windows Server 2012. http://technet.microsoft.com/en-us/library/jj134246.aspx

http://msdn.microsoft.com/en-us/library/windows/hardware/ff547565(v=vs.85).aspx

Question No: 52 HOTSPOT – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains two DHCP servers named Server1 and Server2. Both servers have multiple IPv4 scopes.

Server1 and Server2 are used to assign IP addresses for the network IDs of 172.20.0.0/16 and 131.107.0.0/16.

You install the IP Address Management (IPAM) Server feature on a server named IPAM1 and configure IPAM1 to manage Server1 and Server2.

Some users from the 172.20.0.0 network report that they occasionally receive an IP address conflict error message.

You need to identify whether any scopes in the 172.20.0.0 network ID conflict with one another.

What Windows PowerShell cmdlet should you run?

To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Type the following command at a Windows PowerShell prompt and press ENTER:

PS C:\gt; Get-IpamRange -AddressFamily IPv4 -AddressCategory Private|where-object

{$_.Overlapping -eq “True”}

The previous command will display any overlapping IP address ranges, if they exist.

Question No: 53 – (Topic 1)

Your network contains 20 iSCSI storage appliances that will provide storage for 50 Hyper-V hosts running Windows Server 2012 R2.

You need to configure the storage for the Hyper-V hosts. The solution must minimize administrative effort.

What should you do first?

  1. Install the iSCSI Target Server role service and configure iSCSI targets.

  2. Install the iSNS Server service feature and create a Discovery Domain.

  3. Start the Microsoft iSCSI Initiator Service and configure the iSCSI Initiator Properties.

  4. Install the Multipath I/O (MPIO) feature and configure the MPIO Properties.

Answer: A Explanation:

Windows Server 2012 includes an iSCSI Target role that, along with Failover Clustering, allows it to become a cost-effective and highly-available iSCSI Storage Array.

We can connect from our Hyper-V host to the iSCSI target on the storage array with the following PowerShell command line:

New-IscsiTargetPortal -TargetPortalAddress lt;IP_Address or FQDN of storage arraygt;

$target = Get-IscsiTarget

Connect-IscsiTarget -NodeAddress $target.NodeAddress Incorrect:

Not B. Discovery Domains in an iSCSI fabric, like zones in a Fibre Channel fabric, enable you to partition the storage resources in your storage area network (SAN). By creating and managing Discovery Domains, you can control the iSCSI targets that each iSCSI initiator can see and log on to.

Reference: Configure iSCSI Target Server Role on Windows Server 2012

Question No: 54 – (Topic 1)

You have a server named SCI that runs a Server Core Installation of Windows Server 2012 R2. Shadow copies are enabled on all volumes.

You need to delete a specific shadow copy. The solution must minimize server downtime. Which tool should you use?

  1. Shadow

  2. Diskshadow

  3. Wbadmin

  4. Diskpart

Answer: B Explanation:

DiskShadow.exe is a tool that exposes the functionality offered by the Volume Shadow Copy Service (VSS).

The diskshadow command delete shadows deletes shadow copies.

Ensurepass 2018 PDF and VCE

Reference: Technet, Diskshadow

Question No: 55 – (Topic 1)

Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2.

Both servers have the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latency WAN link.

Server2 hosts a virtual machine named VM1.

You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs.

What should you do?

  1. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.

  2. From the Hyper-V Settings of Server2, modify the Replication Configuration settings.

    Enable replication for VM1.

  3. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.

  4. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for VM1.

Answer: D Explanation:

You first have to enable replication on the Replica server-Server1-by going to the server and modifying the quot;Replication Configurationquot; settings under Hyper-V settings. You then go to VM1-which presides on Server2- and run the quot;Enable Replicationquot; wizard on VM1.

Ensurepass 2018 PDF and VCE

Question No: 56 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers.

The domain controllers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You configure a user named User1 as a delegated administrator of DC10.

You need to ensure that User1 can log on to DC10 if the network link between the Main site and the Branch site fails.

What should you do?

  1. Add User1 to the Domain Admins group.

  2. On DC10, modify the User Rights Assignment in Local Policies.

  3. Run repadmin and specify the /prp parameter.

  4. On DC10, run ntdsutil and configure the settings in the Roles context.

Answer: C Explanation:

repadmin /prp will allow the password caching of the local administrator to the RODC. This command lists and modifies the Password Replication Policy (PRP) for read-only domain controllers (RODCs).

Reference: RODC Administration

https://technet.microsoft.com/en-us/library/cc755310(v=ws.10).aspx

Question No: 57 – (Topic 1)

You have a server named Server1 that runs Windows Server 2012 R2.

From Server Manager, you install the Active Directory Certificate Services server role on

Server1.

A domain administrator named Admin1 logs on to Server1.

When Admin1 runs the Certification Authority console, Admin1 receives the following error message.

Ensurepass 2018 PDF and VCE

You need to ensure that when Admin1 opens the Certification Authority console on Server1, the error message does not appear.

What should you do?

  1. Install the Active Directory Certificate Services (AD CS) tools.

  2. Run the regsvr32.exe command.

  3. Modify the PATH system variable.

  4. Configure the Active Directory Certificate Services server role from Server Manager.

Answer: D Explanation:

The error message is related to missing role configuration.

  • Cannot Manage Active Directory Certificate Services

    Resolution: configure the two Certification Authority and Certification Authority Web Enrollment Roles:

    Ensurepass 2018 PDF and VCE

    image

    Reference: Cannot manage Active Directory Certificate Services in Server 2012 Error 0x800070002

    Question No: 58 – (Topic 1)

    Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed.

    The network contains client computers that run either Linux, Windows 7, or Windows 8.

    You have a standard primary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)

    Ensurepass 2018 PDF and VCE

    You plan to configure Name Protection on all of the DHCP servers.

    You need to configure the adatum.com zone to support Name Protection.

    Which two configurations should you perform from DNS Manager? (Each correct answer presents part of the solution. Choose two.)

    1. Sign the zone.

    2. Store the zone in Active Directory.

    3. Modify the Security settings of the zone.

    4. Configure Dynamic updates.

    5. Add a DNS key record

      Answer: B,D Explanation:

      Name protection requires secure update to work. Without name protection DNS names may be hijacked.

      You can use the following procedures to allow only secure dynamic updates for a zone. Secure dynamic update is supported only for Active Directory-integrated zones. If the zone type is configured differently, you must change the zone type and directory-integrate the zone before securing it for Domain Name System (DNS) dynamic updates.

      1. (B) Convert primary DNS server to Active Directory integrated primary

      2. (D) Enable secure dynamic updates

        Ensurepass 2018 PDF and VCE

        Reference: DHCP: Secure DNS updates should be configured if Name Protection is enabled on any IPv4 scope

        http://technet.microsoft.com/en-us/library/ee941152(v=ws.10).aspx

        Question No: 59 – (Topic 1)

        You have a server named Server1 that runs Windows Server 2012 R2. Each day, Server1 is backed up fully to an external disk.

        On Server1, the disk that contains the operating system fails. You replace the failed disk.

        You need to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (Windows RE).

        What should you do?

        1. Run the Start-WBVolumeRecovery cmdlet and specify the -backupset parameter.

        2. Run the Get-WBBareMetalRecovery cmdlet and specify the -policy parameter.

        3. Run the wbadmin.exe start recovery command and specify the -recoverytarget parameter.

        4. Run the wbadmin.exe start sysrecovery command and specify the -backuptarget parameter.

    Answer: D Explanation:

    Performs a system recovery (bare metal recovery). This subcommand can be run only from the Windows Recovery Environment.

  • -backupTarget

  • Specifies the storage location that contains the backup or backups that you want to recover. This parameter is useful when the storage location is different from where backups of this computer are usually stored.

    Reference: Wbadmin start sysrecovery http://technet.microsoft.com/en-us/library/cc742118.aspx

    Question No: 60 – (Topic 1)

    Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.

    You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.

    Which IPV6 scope prefix should you use?

    A. 2001:123:4567:890A::

    B. FE80:123:4567::

    C. FF00:123:4567:890A::

    D. FD00:123:4567::

    Answer: D Explanation: Explanation/Reference:

    * A unique local address (ULA) is an IPv6 address in the block fc00::/7, defined in RFC 4193. It is the approximate IPv6 counterpart of the IPv4 private address.

    The address block fc00::/7 is divided into two /8 groups:

    / The block fc00::/8 has not been defined yet.

    / The block fd00::/8 is defined for /48 prefixes, formed by setting the 40 least-significant bits of the prefix to a randomly generated bit string.

    • Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address ranges:

      / They are not allocated by an address registry and may be used in networks by anyone

      without outside involvement.

      / They are not guaranteed to be globally unique.

      / Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot be delegated in the global DNS.

      Reference: RFC 4193

      Topic 2, Volume B

      100% Dumps4cert Free Download!
      Download Free Demo:70-980 Demo PDF
      100% Dumps4cert Pass Guaranteed!
      Download 2018 Dumps4cert 70-980 Full Exam PDF and VCE

      Dumps4cert ExamCollection Testking
      Lowest Price Guarantee Yes No No
      Up-to-Dated Yes No No
      Real Questions Yes No No
      Explanation Yes No No
      PDF VCE Yes No No
      Free VCE Simulator Yes No No
      Instant Download Yes No No

    Leave a Reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.