[Free] 2018(Mar) EnsurePass Dumpsleader Microsoft 70-412 Dumps with VCE and PDF 41-50

By | April 23, 2018
0 Comment

Ensurepass.com : Ensure you pass the IT Exams
2018 Mar Microsoft Official New Released 70-412
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-412.html

Configuring Advanced Windows Server 2012 R2 Services

Question No: 41 – (Topic 1)

Your network contains two servers named HV1 and HV2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed.

HV1 hosts 25 virtual machines. The virtual machine configuration files and the virtual hard disks are stored in D:\VM.

You shut down all of the virtual machines on HV1. You copy D:\VM to D:\VM on HV2.

You need to start all of the virtual machines on HV2. You want to achieve this goal by using the minimum amount of administrative effort.

What should you do?

  1. Run the Import-VMInitialReplication cmdlet.

  2. From HV1, export all virtual machines to D:\VM. Copy D:\VM to D:\VM on HV2 and overwrite the existing files. On HV2, run the Import Virtual Machine wizard.

  3. From HV1, export all virtual machines to D:\VM. Copy D:\VM to D:\VM on HV2 and overwrite the existing files. On HV2, run the New Virtual Machine wizard.

  4. Run the Import-VM cmdlet.

Answer: D Explanation:

Import-VM

Imports a virtual machine from a file.

Example

Imports the virtual machine from its configuration file. The virtual machine is registered in- place, so its files are not copied.

Windows PowerShell

PS C:\gt; Import-VM -Path #39;D:\Test\VirtualMachines\5AE40946-3A98-428E-8C83- 081A3C6BD18C.XML#39;

Reference: Import-VM

Question No: 42 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. The system properties of Server1 are shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to configure Server1 as an enterprise subordinate certification authority (CA). What should you do first?

  1. Add RAM to the server.

  2. Set the Startup Type of the Certificate Propagation service to Automatic.

  3. Install the Certification Authority Web Enrollment role service.

  4. Join Server1 to the contoso.com domain.

Answer: D Explanation:

Enterprise CAs must be domain members. From the exhibit we see that it is only a Workgroup member.

Note:

A new CA can be the root CA of a new PKI or subordinate to another in an existing PKI. Enterprise subordinate certification authority.

An enterprise subordinate CA must get a CA certificate from an enterprise root CA but can then issue certificates to all users and computers in the enterprise. These types of CAs are often used for load balancing of an enterprise root CA.

Ensurepass 2018 PDF and VCE

Reference: Install a Subordinate Certification Authority

Question No: 43 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.

You are creating a central access rule named TestFinance that will be used to audit members of the Authenticated Users group for access failure to shared folders in the finance department.

You need to ensure that access requests are unaffected when the rule is published. What should you do?

  1. Add a User condition to the current permissions entry for the Authenticated Users principal.

  2. Set the Permissions to Use the following permissions as proposed permissions.

  3. Add a Resource condition to the current permissions entry for the Authenticated Users principal.

  4. Set the Permissions to Use following permissions as current permissions.

Answer: B Explanation:

Proposed permissions enable an administrator to more accurately model the impact of potential changes to access control settings without actually changing them.

Reference: Access Control and Authorization Overview http://technet.microsoft.com/en-us/library/jj134043.aspx

Question No: 44 – (Topic 1)

Your network contains an Active Directory forest named contoso.com.

Users frequently access the website of an external partner company. The URL of the website is http://partners.adatum.com.

The partner company informs you that it will perform maintenance on its Web server and that the IP addresses of the Web server will change.

After the change is complete, the users on your internal network report that they fail to access the website. However, some users who work from home report that they can access the website.

You need to ensure that your DNS servers can resolve partners.adatum.com to the correct IP address immediately.

What should you do?

  1. Run dnscmd and specify the CacheLockingPercent parameter.

  2. Run Set-DnsServerGlobalQueryBlockList.

  3. Run ipconfig and specify the Renew parameter.

  4. Run Set-DnsServerCache.

Answer: D Explanation:

The Set-DnsServerCache cmdlet modifies cache settings for a Domain Name System (DNS) server.

Run Set-DnsServerCache with the -LockingPercent switch.

/ -LockingPercentlt;UInt32gt;

Specifies a percentage of the original Time to Live (TTL) value that caching can consume. Cache locking is configured as a percent value. For example, if the cache locking value is set to 50, the DNS server does not overwrite a cached entry for half of the duration of the TTL. By default, the cache locking percent value is 100. This value means that the DNS server will not overwrite cached entries for the entire duration of the TTL.

Note. A better way would be clear the DNS cache on the DNS server with either Dnscmd

/ClearCache (from command prompt), or Clear-DnsServerCache (from Windows PowerShell).

Reference: Set-DnsServerCache http://technet.microsoft.com/en-us/library/jj649852.aspx

Incorrect:

Not A. You need to use the /config parameter as well:

You can change this value if you like by using the dnscmd command: dnscmd /Config /CacheLockingPercentlt;percentgt;

Question No: 45 DRAG DROP – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Servers, and Server4. All servers run Windows Server 2012 R2.

Server1 and Server2 are located in a site named Site1. Server3 and Server4 are located in a site named Site2. The servers are configured as nodes in a failover cluster named Cluster1.

Cluster1 is configured to use the Node Majority quorum configuration.

You need to ensure that Server1 is the only server in Site1 that can vote to maintain quorum.

What should you run from Windows PowerShell?

To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

We remove Server2 from quorum vote by setting it#39;s NodeWeight to 0.

NodeWeight settings are used during quorum voting to support disaster recovery and multi- subnet scenarios for AlwaysOn Availability Groups and SQL Server Failover Cluster Instances.

Example (Powershell)

The following example changes the NodeWeight setting to remove the quorum vote for the “AlwaysOnSrv1” node.

Import-Module FailoverClusters

$node = “AlwaysOnSrv1”

(Get-ClusterNode $node).NodeWeight = 0

Question No: 46 – (Topic 1)

You have a virtual machine named VM1 that runs on a host named Host1.

You configure VM1 to replicate to another host named Host2. Host2 is located in the same physical location as Host1.

You need to add an additional replica of VM1. The replica will be located in a different physical site.

What should you do?

  1. From VM1 on Host2, click Extend Replication.

  2. On Host1, configure the Hyper-V settings.

  3. From VM1 on Host1, click Extend Replication.

  4. On Host2, configure the Hyper-V settings.

Answer: A Explanation:

Extend Replication through UI:

Before you Extend Replication to third site, you need to establish the replication between a primary server and replica server.

Once that is done, go to replica site and from Hyper-V UI manager select the VM for which you want to extend the replication. Right click on VM and select “Replication-gt;Extend Replication …”. This will open Extend Replication Wizard which is similar to Enable Replication Wizard.

NOTE: You configure a server to receive replication with Hyper-V Manager, in this situation the replica site is assumed to be the Replica Server. Therefore you extend replication from VM1 on Host2.

Note 2: With Hyper-V Extend Replication feature in Windows Server 2012 R2, customers can have multiple copies of data to protect them from different outage scenarios. For example, as a customer I might choose to keep my second DR site in the same campus or a few miles away while I want to keep my third copy of data across the continents to give added protection for my workloads. Hyper-V Replica Extend replication exactly addresses this problem by providing one more copy of workload at an extended site apart from replica site.

Reference: Hyper-V Replica: Extend Replication

http://blogs.technet.com/b/virtualization/archive/2013/12/10/hyper-v-replica-extend- replication.aspx

Question No: 47 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as an enterprise certification authority (CA).

You need to ensure that all of the users in the domain are issued a certificate that can be used for the following purposes:

->Email security

->Client authentication

->Encrypting File System (EFS)

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  1. From a Group Policy, configure the Certificate Services Client – Auto-Enrollment settings.

  2. From a Group Policy, configure the Certificate Services Client – Certificate Enrollment Policy settings.

  3. Modify the properties of the User certificate template, and then publish the template.

  4. Duplicate the User certificate template, and then publish the template.

  5. From a Group Policy, configure the Automatic Certificate Request Settings settings.

Answer: A,D Explanation:

The default user template supports all of the requirements EXCEPT auto enroll as shown below:

Ensurepass 2018 PDF and VCE

However a duplicated template from users has the ability to autoenroll:

Ensurepass 2018 PDF and VCE

The Automatic Certificate Request Settings GPO setting is only available to Computer, not user.

Ensurepass 2018 PDF and VCE

Reference: Manage Certificate Enrollment Policy by Using Group Policy. http://technet.microsoft.com/en-us/library/dd851772.aspx

Question No: 48 – (Topic 1)

You have 20 servers that run Windows Server 2012 R2.

You need to create a Windows PowerShell script that registers each server in Windows Azure Backup and sets an encryption passphrase.

Which two PowerShell cmdlets should you run in the script? (Each correct answer presents part of the solution. Choose two.)

  1. New-OBPolicy

  2. New-OBRetentionPolicy

  3. Add-OBFileSpec

  4. Start-OBRegistration

  5. Set OBMachineSetting

Answer: D,E Explanation:

  1. Start-OBRegistration

    Registers the current computer with Windows Azure Online Backup using the credentials (username and password) created during enrollment.

  2. The Set-OBMachineSetting cmdlet sets a OBMachineSetting object for the server that includes proxy server settings for accessing the internet, network bandwidth throttling settings, and the encryption passphrase that is required to decrypt the files during recovery to another server.

Incorrect:

Not C. TheAdd-OBFileSpeccmdlet adds theOBFileSpecobject, which specifies the items to include or exclude from a backup, to the backup policy (OBPolicyobject).

TheOBFileSpecobject can include or exclude multiple files, folders, or volumes.

Reference: Start-OBRegistration; Set OBMachineSetting

http://technet.microsoft.com/en-us/library/hh770398.aspx http://technet.microsoft.com/en-us/library/hh770409.aspx

Question No: 49 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8.

You need to configure a custom Access Denied message that will be displayed to users when they are denied access to folders or files on Server1.

What should you configure?

  1. A classification property

  2. The File Server Resource Manager Options

  3. A file management task

  4. A file screen template

Answer: B Explanation:

Access-denied assistance can be configured by using the File Server Resource Manager console on the file server.

Note: Access-denied assistance is a new feature in Windows Server 2012, which provides the following ways to troubleshoot issues that are related to access to files and folders:

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.