[Free] 2018(May) EnsurePass Examcollection Microsoft 70-687 Dumps with VCE and PDF 81-90

By | April 30, 2018

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-687
100% Free Download! 100% Pass Guaranteed!

Configuring Windows 8.1

Question No: 81 – (Topic 1)

All client computers in a company#39;s network environment run Windows 8.1. A client computer has two internal hard disk drives. The hard drives are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You are choosing a backup destination for drive C. You have the following requirements:

->Ensure that the backup file is available if drive C fails.

->Ensure that the backup file can be accessed by other computers on the network.

->Support the backup of multiple system images.

You need to select a backup destination that meets the requirements. Which destination should you select?

  1. shared network folder

  2. drive D

  3. multiple DVDs

  4. external hard drive

Answer: D Explanation:

Shared network folder will only support one system image:

Ensurepass 2018 PDF and VCE

That applies to internal / external disks:

Ensurepass 2018 PDF and VCE

http://windows.microsoft.com/en-us/windows7/Back-up-your-programs-system-settings- and-files

Keeping different versions of system images:

If you#39;re saving your system images on an internal or external drive, or on CDs or DVDs, you can keep several versions of system images.

On internal and external hard drives, older system images will be deleted when the drive runs out of space. Conclusion is to use external HDD and share it over the network.

http://technet.microsoft.com/en-us/library/cc737048(v=ws.10).aspx What Are Dynamic Disks and Volumes?

Like basic disks, which are the most commonly used storage type found on computers running Microsoft Windows, dynamic disks can use the master boot record (MBR) or GUID partition table (GPT) partitioning scheme. All volumes on dynamic disks are known as dynamic volumes. Dynamic disks were first introduced with Windows 2000 and provide features that basic disks do not, such as the ability to create volumes that span multiple disks (spanned and striped volumes), and the ability to create fault tolerant volumes

(mirrored and RAID-5 volumes).

http://lifehacker.com/5958865/how-to-use-windows-8s-new-file-history-backup-aka-time- machine-for-windows

How to Use Windows 8#39;s New File History Backup (aka Time Machine for Windows)

The Difference Between File History and Windows Backup

Windows Backup still exists in Windows 8, it#39;s just been renamed to quot;Windows 7 File Recovery.quot; So, if you want to back up your files, you have the choice of which system you want to use.

Windows Backup (now called quot;Windows 7 File Recoveryquot;) backs up your computer on a schedule you set-for example, once a week on Sunday at 2am (though the default is once a month). You can choose to back up whatever you want, from a small selection of personal files to program files to anything else. You can even create a full system image, which is handy when you want to restore your computer to exactly the way it was at a certain point in time. To restore files, you had to go into it#39;s slightly confusing interface and find the files you were looking for in a set of folders on your backup drive.

Question No: 82 – (Topic 1)

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1.

Portable client computers no longer connect to the corporate wireless network.

You need to ensure that when the corporate wireless network is available, the computers always connect to it automatically.

Which two actions would achieve the goal? (Each correct answer presents a complete solution. Choose two.)

  1. Create a Group Policy object (GPO) to configure a wireless network policy. Link the GPO to the organizational unit that contains the computers.

  2. Configure the corporate wireless network as an unmetered network.

  3. Configure the corporate wireless network as a preferred network.

  4. Manually connect to the corporate wireless network and select the option to connect automatically to that network.

Answer: C,D Explanation: Answer:

Configure the corporate wireless network as a preferred network.

Manually connect to the corporate wireless network and select the option to connect automatically to that network.

http://blogs.technet.com/b/canitpro/archive/2014/03/05/windows-8-1-tips-manage-wireless- network-profiles.aspx

Windows 8.1 tips: Managing Wireless Network Profiles

And finally, if you wanted to change the preferred order for your machine to connect to specific wireless network, you could move a network up in the priority list by using the command: set profileorder name=goose interface=quot;Wi-Fiquot; priority=1

Ensurepass 2018 PDF and VCE

http://www.eightforums.com/tutorials/20152-wireless-networks-priority-change-windows-8- a.html

How to Change Connection Priority of Wireless Networks in Windows 8 and 8.1

Windows usually connects to networks in this priority order:


->WiFi (wireless)

->Mobile broadband

When you connect to a new WiFi network, it’s added to the list, and Windows will connect to that network while it’s in range. If you connect to another WiFi network while in range of the first network, Windows will prefer the second network over the first one.

Mobile broadband networks are treated differently. If you manually connect to a mobile broadband network when there is a WiFi network in range, the mobile broadband network is preferred just for that session. The next time you’re in range of both networks, the WiFi network is preferred. This is because mobile broadband networks typically are metered.

If you want to force your PC to prefer a mobile broadband network over WiFi, tap or click the WiFi network in the list of networks, and then click Disconnect. Windows won’t automatically connect to that WiFi network.

Question No: 83 – (Topic 1)

A company has 10 client computers that run Windows 8.1. You are responsible for technical support. You purchase a support tool from the Windows Store while logged in with your Microsoft account.

You install the support tool on several client computers.

Three months later, you attempt to install the support tool on another client computer. The installation fails.

You need to ensure that you can install the support tool on the client computer. What should you do?

  1. Log in with your Microsoft account and remove a computer from the Windows Store device list.

  2. On the computer on which you want to install the tool, synchronize the Windows Store application licenses.

  3. Disassociate your Microsoft account from the computer on which you want to install the tool. Then reassociate your Microsoft account with the computer.

  4. Reset your Microsoft account password.

Answer: A Explanation:

You could prevent installation of mass storage devices but use the quot;Allow administrators to overridequot; setting to ensure an administrator could get the flash drive installed.

Ensurepass 2018 PDF and VCE

http://windows.microsoft.com/en-us/windows-8/windows-store-install-apps-multiple-pcs You can remove a PC from your account when you#39;re signed in to the Store on any PC. After you#39;ve removed a PC from your account, you won#39;t be able to use the apps that were installed from the Store on that PC.

Further information:

http://windows.microsoft.com/en-us/windows-8/what-troubleshoot-problems-app Troubleshoot problems with an app

Sync app licenses

If a license for an app is out of sync with the license installed on your PC, the app might stop working.

Question No: 84 DRAG DROP – (Topic 1)

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1. Two computers named COMPUTER1 and COMPUTER2 are connected to one network switch and joined to the domain. Windows Firewall is turned off on both computers.

You are planning a remote management solution. You have the following requirements:

->Ensure that COMPUTER2 can run remote commands on COMPUTER1.

->Test the solution by successfully running a command from COMPUTER2 that executes on COMPUTER1.

You need to select the commands to run on COMPUTER1 and COMPUTER2 to meet the remote management requirements.

Which commands should you run? (To answer, drag the appropriate command or commands to the correct location or locations in the answer area. Commands may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)

Ensurepass 2018 PDF and VCE


Ensurepass 2018 PDF and VCE


Ensurepass 2018 PDF and VCE

http://msdn.microsoft.com/en-us/library/aa384372(v=vs.85).aspx Installation and Configuration for Windows Remote Management

The winrm quickconfig command (or the abbreviated version winrm qc) performs the following operations:

Starts the WinRM service, and sets the service startup type to auto-start. Configures a listener for the ports that send and receive WS-Management protocol messages using either HTTP or HTTPS on any IP address.

Defines ICF exceptions for the WinRM service, and opens the ports for HTTP and HTTPS.

http://technet.microsoft.com/en-us/library/hh875630.aspx Winrs

Windows Remote Management allows you to manage and execute programs remotely.


winrs [/lt;parametergt;[:lt;valuegt;]] lt;commandgt;



Specifies the target endpoint using a NetBIOS name or the standard connection:

lt;urlgt;: [lt;transportgt;://]lt;targetgt;[:lt;portgt;] If not specified, /r:localhost is used.

Question No: 85 – (Topic 1)

You administer a group of 10 client computers that run Windows 8.1. The client computers are members of a local workgroup. Employees log on to the client computers by using their Microsoft accounts.

The company plans to use Windows BitLocker Drive Encryption. You need to back up the BitLocker recovery key.

Which two options can you use? (Each correct answer presents a complete solution. Choose two.)

  1. Save the recovery key to a file on the BitLocker-encrypted drive.

  2. Save the recovery key in the Credential Store.

  3. Save the recovery key to SkyDrive.

  4. Print the recovery key.

Answer: A,D

Explanation: One of the new features in Windows 8.1 for BitLocker is the ability to backup your BitLocker recovery key to a Microsoft account. During the process before encryption begins, a user is prompted for a location to make a backup copy of the recovery key. Save to your Microsoft account has been added along with save to a file and print the recovery key.

Ensurepass 2018 PDF and VCE

Question No: 86 – (Topic 1)

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1.

A notification appears when domain users change Windows settings and when applications try to make changes to client computers.

You need to ensure that a notification appears only when an application tries to make changes to the computer.

What should you do?

  1. Configure the Notification Area Icons settings on the client computers.

  2. Create a Group Policy object (GPO) that enables the Admin Approval Mode for the built- in Administrator account policy.

  3. Configure the User Account Control (UAC) settings on the client computers.

  4. Create a Group Policy object (GPO) that disables the Run all administrators in Admin Approval Mode policy.

Answer: C

Explanation: http://www.thewindowsclub.com/change-user-account-settings-windows-8

Change User Account Control settings in Windows 8

The User Account Control basically notifies you before changes are made to your PC – not all changes, but only those which require Administrator level permissions. These changes could have been initiated by the user, by the operation system, by a genuine software – or even malware! Every time such an administrator level change is initiated, Windows UAC will prompt the user for approval or denial. If the user approves the change, the change is made; in not, no changes are made to the system.

Ensurepass 2018 PDF and VCE


Always notify me

Notify me only when apps try to make changes to my computer (default)

Notify me only when apps try to make changes to my computer (don’t dim my desktop) Never notify me

Question No: 87 – (Topic 1)

You update the video card driver on a portable computer that runs Windows 8.1.

When a user connects the portable computer to an external monitor, the external monitor duplicates the display on the portable computer screen.

You need to ensure that the user can display additional desktop space on the external monitor.

What should you do?

  1. Run the DisplaySwitch /extend command.

  2. Start the computer from the Windows 8.1 installation media and perform a system image recovery.

  3. Roll back the video card driver to the previous version.

  4. Run the sic /scannow command.

Answer: A Explanation:

http://jeffwouters.nl/index.php/2012/06/switch-your-display-through-the-command-line/ Switch your display through the command line

displayswitch.exe parameters:

Ensurepass 2018 PDF and VCE

Question No: 88 – (Topic 1)

An organization has client computers that run Windows 7. You upgrade the client computers to Windows 8.1 without migrating the local user profiles. You install the Windows Assessment and Deployment Kit (ADK) in the environment.

You need to migrate the user profiles from the Windows 7 installation to the Windows 8.1 installation.

What should you do first on each client computer?

  1. Run the scanstate command.

  2. Run Windows Easy Transfer and select the user profile to migrate

  3. Run the Ioadstate command.

  4. Copy the Default Profile to a folder on drive C.

  5. Run the ImaqeX command.

Answer: A Explanation:


The ScanState command is used with the User State Migration Tool (USMT) 5.0 to scan the source computer, collect the files and settings, and create a store.

Question No: 89 – (Topic 1)

A company has an Active Directory Domain Services (AD DS) domain with one physical domain controller. All client computers run Windows 8.1.

A client computer hosts a Windows 8.1 virtual machine (VM) test environment. The VMs are connected to a private virtual switch that is configured as shown in the Virtual Switch Manager exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The VMS are unable to connect to the domain controller. You have the following requirements:

->Configure the test environment to allow VMs to communicate with the domain controller.

->Ensure that the VMs can communicate with other VMS fl the test environment

when the domain controller is unavailable.

You need to meet the requirements. What should you do first?

  1. Create a new virtual switch with an Internal Network connection type.

  2. Create a new virtual switch with a Private Network connection type.

  3. Create a new virtual switch with an External Network connection type.

  4. Change the connection type of the private virtual switch to Internal only.

Answer: C Explanation:

http://john.bryntze.net/jbkb-v2/certification-exam-70-687-configuring-windows-8-part-2- configure-hardware-and-applications-16/

Virtual switches/ Hyper-V VLAN – you can create 3 different types of virtual switches depending the needs of your virtual machines and one single machine can use multiple virtual NICs that is member of different Virtual Switches.

->External – This virtual switch binds to the physical network adapter and create a

new adapter you can see in Control Panel\Network and Internet\Network Connections so if a virtual machine needs contact outside the host machine this one is a must.

->Internal – This virtual switch can be used to connect all virtual machines and the

host machine but cannot go outside that.

->Private – This virtual switch can only be used by the virtual host

Further information:

http://technet.microsoft.com/en-us/library/cc816585(v=ws.10).aspx Configuring Virtual Networks

Ensurepass 2018 PDF and VCE

Private will not allow communication with the host machine. External will allow communication with the host machine but also allow access to other machines on the host machine#39;s network.

Question No: 90 – (Topic 1)

A company has 100 client computers that run Windows 8.1. You plan to install a custom app that requires a license key.

You need to ensure that the installation process does not prompt for the manual entry of a license key.

What should you do?

  1. Install and run the Microsoft Deployment Toolkit.

  2. Install and run the Microsoft Assessment and Planning Toolkit.

  3. Install and run the Windows App Certification Kit.

  4. Install and run the Windows Application Compatibility Toolkit.

Answer: A Explanation:

http://tweaks.com/windows/65179/how-to-install-windows-8-without-a-product-key/ Windows Assessment and Deployment Kit for Windows 8.1:

Ensurepass 2018 PDF and VCE

http://technet.microsoft.com/en-us/library/hh825212.aspx Step-by-Step: Windows 8 Deployment for IT Professionals

This guide uses the tools included in the Windows Assessment and Deployment Kit (Windows ADK). This includes Windows System Image Manager (Windows SIM), the Deployment Imaging Servicing and Management tool (DISM), and Windows Preinstallation Environment (Windows PE). In addition to the tools that this guide describes, other tools are available in the Windows ADK that you can use to prepare your organization for migrating to Windows 8 and Windows 8.1:

http://technet.microsoft.com/en-us/library/hh825079.aspx DISM Global Options for Command-Line Syntax

Global options can be added to most of the servicing and imaging options in the Deployment Image Servicing and Management (DISM) tool. These options can be used to access the command-line help, specify the location of files to use, and control logging.

Basic Syntax for Servicing Commands

After you have mounted or applied a Windows庐 image so that it is available offline as a flat file structure, you can specify any DISM global options, the servicing option that will update your image, and the location of the offline image. You can use only one servicing option per command line.

If you are servicing a running computer, you can use the /Online option instead of specifying the location of the offline Windows image. The commands and options that are available for servicing an image depend on which Windows operating system you are servicing. They also depend on whether the image is offline or a running operating system. All commands work on an offline Windows image. Subsets of the commands are available for servicing a running operating system.

The base syntax for DISM servicing commands is:

DISM.exe {/Image:lt;path_to_imagegt; | /Online} [dism_global_options] {servicing_option} [lt;servicing_argumentgt;]


DISM App Package (.appx or .appxbundle) Servicing Command-Line Options

You can use app package-servicing commands to add, remove, and list provisioned app packages (.appx or .appxbundle) in a Windows image. An .appxbundle, new for Windows 8.1, is a collection of app and resource packages used together to enrich the app experience, while minimizing the disk footprint on a given PC.

Provisioned app packages are added to a Windows image and are then installed for every new or existing user profile the next time the user logs on. For more information, including requirements for app package provisioning, see Sideload Apps with DISM.

You can also use Windows PowerShell to add, remove, and list app packages (.appx or

.appxbundle) per image or per user in a Windows installation.

http://technet.microsoft.com/en-us/library/hh852635.aspx Sideload Apps with DISM

You can sideload line-of-business (LOB) Windows Store apps to a Windows庐 image by using Windows PowerShell庐 or the Deployment Image Servicing and Management (DISM) platform. Windows Store apps are a new type of application that runs on:

Windows 8.1 devices

Windows 8 devices

Windows Server 2012 R2 devices Windows Server 2012

Windows Embedded 8 Industry

Typically, Windows Store apps are available only through the Windows庐 Store. You can submit LOB Windows Store apps to the Windows Store and make them available outside of your enterprise. However, you can also develop Windows Store apps for use only within your enterprise and add them to Windows devices you manage through a process we call sideloading. Sideloaded apps do not have to be certified by or installed through the Windows Store.

Further information:

http://msdn.microsoft.com/en-us/library/bb977556.aspx Microsoft Assessment and Planning Toolkit

The Microsoft Assessment and Planning Toolkit (MAP) is an agentless, automated, multi- product planning and assessment tool for quicker and easier desktop, server and cloud migrations. MAP provides detailed readiness assessment reports with extensive hardware and software information, and actionable recommendations to help organizations accelerate their IT infrastructure planning process, and gather more detail on assets that reside within their current environment. MAP also provides server utilization data for Hyper- V server virtualization planning; identifying server placements, and performing virtualization candidate assessments.

http://msdn.microsoft.com/en-us/windows/apps/bg127575.aspx Windows App Certification Kit

Before you submit your app for certification and listing in the Windows Store, use the Windows App Certification Kit to test your app and make sure it#39;s ready to go.

http://msdn.microsoft.com/en-us/library/windows/desktop/dd562082(v=vs.85).aspx Application Compatibility Toolkit (ACT)

The Microsoft Application Compatibility Toolkit (ACT) is a lifecycle management tool that assists in identifying and managing your overall application portfolio, reducing the cost and time involved in resolving application compatibility issues, and helping you quickly deploy

Windows and Windows updates.

100% Ensurepass Free Download!
Download Free Demo:70-687 Demo PDF
100% Ensurepass Free Guaranteed!
70-687 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.