[Free] Download New Updated (April 2016) Cisco 200-120 Actual Tests 231-240

By | April 6, 2016








Router>enable (Need to enter the password cisco)

Router#show running-config






What would be the effect of issuing the command ip access-group 114 in to the fa0/0 interface?


A.     Attempts to telnet to the router would fail.

B.     It would allow all traffic from the network.

C.     IP traffic would be passed through the interface but TCP and UDP traffic would not.

D.     Routing protocol updates for the network would not be accepted from the fa0/0 interface.


Correct Answer: B








Router>enable (Need to enter the password cisco)

Router#show running-config






What would be the effect of issuing the command ip access-group 115 in on the s0/0/1 interface?


A.     No host could connect to RouterC through s0/0/1.

B.     Telnet and ping would work but routing updates would fail.

C.     FTP, FTP-DATA, echo, and www would work but telnet would fail.

D.     Only traffic from the network would pass through the interface.


Correct Answer: A







Correct Answer:

On the MGT Router:

MGT# config terminal

MGT(config)# router eigrp 12

MGT(config-router)# network






A network associate is configuring a router for the weaver company to provide internet access. The ISP has provided the company six public IP addresses of The company has 14 hosts that need to access the internet simultaneously. The hosts in the company LAN have been assigned private space addresses in the range of


Correct Answer:

The company has 14 hosts that need to access the internet simultaneously but we just have 6 public IP addresses from to Therefore we have to use NAT overload (or PAT)


Double click on the Weaver router to open it


Router#configure terminal


First you should change the router’s name to Weaver.

Router(config)#hostname Weaver


Create a NAT pool of global addresses to be allocated with their netmask.

Weaver(config)#ip nat pool mypool netmask


Create a standard access control list that permits the addresses that are to be translated.

Weaver(config)#access-list 1 permit


Establish dynamic source translation, specifying the access list that was defined in the prior step.

Weaver(config)#ip nat inside source list 1 pool mypool overload


This command translates all source addresses that pass access list 1, which means a source address from to, into an address from the pool named mypool (the pool contains addresses from to


Overload keyword allows mapping multiple IP addresses to a single registered IP address (many-to-one) by using different ports.


The question said that appropriate interfaces have been configured for NAT inside and NAT outside statements.


This is how to configure the NAT inside and NAT outside, just for your understanding:


Weaver(config)#interface fa0/0

Weaver(config-if)#ip nat inside


Weaver(config)#interface s0/0

Weaver(config-if)#ip nat outside



Finally, we should save all your work with the following command:


Weaver#copy running-config startup-config


Check your configuration by going to “Host for testing” and type:


C :>ping


The ping should work well and you will be replied from








Central Florida Widgets recently installed a new router in their office. Complete the network installation by performing the initial router configurations and configuring RIPV2 routing using the router command line interface (CLI) on the RC.


Configure the router per the following requirements:


Ÿ   Name of the router is R2

Ÿ   Enable secret password is cisco

Ÿ   The password to access user EXEC mode using the console is cisco2

Ÿ   The password to allow telnet access to the router is cisco3


IPV4 addresses mast be configured as follows:


Ÿ   Ethernet network – router has fourth assignable host address in subnet.

Ÿ   Serial network is – router has last assignable host address in the subnet.

Ÿ   Interfaces should be enabled.

Ÿ   Router protocol is RIPV2



In practical examinations, please note the following, the actual information will prevail.


1.       Name or the router is xxx

2.       Enable secret password is xxx

3.       Password In access user EXEC mode using the console is xxx

4.       The password to allow telnet access to the router is xxx

5.       IP information




Correct Answer:


Router#config terminal

Router(config)#hostname R2

R2(config)#enable secret Cisco 1

R2(config)#line console 0

R2(config-line)#password Cisco 2


R2(config)#line vty 0 4

R2(config-line)#password Cisco 3



R2(config)#interface fa0/0

R2(config-if)#ip address

R2(config)#interface s0/0/0

R2(config-if)#ip address

R2(config-if)#no shutdown


R2(config)#router rip

R2(config-router)#version 2




R2#copy run start































A corporation wants to add security to its network. The requirements are:


Ÿ   Host C should be able to use a web browser (HTTP) to access the Finance Web Server.

Ÿ   Other types of access from host C to the Finance Web Server should be blocked.

Ÿ   All access from hosts in the Core or local LAN to the Finance Web Server should be blocked.

Ÿ   All hosts in the Core and on local LAN should be to access the Public Web Server.


You have been tasked to create and apply a numbered access list to a single outbound interface. They can contain no more than three statements that meets these requirements.

Access to the router CLI can be gained by clicking on the appropriate host.

All passwords have been temporarily set to “cisco”.


The Core connection uses an IP address of (Corp1 S port router’s IP, the examination should show the IP right, not on a whim.)


The computers in the Hosts LAN have been assigned addresses of –


Host A

Host B

Host C

Host D


The servers in the Server LAN have been assigned addresses of –


The Finance Web Server is assigned an IP address of




Correct Answer:

Router Corp1 S-interface IP address, when
you use the show test command to check whether correct, if the IP address is wrong, you need to use the command to change the IP address.


Corp1#configure terminal

Corp1(config)#int s1/0

Corresponding port number using the command show run to check.


Corp1(config-if)#ip add

IP address changes as specified in the title, by using the command show run to get the original wrong network mask.



Here you cannot delete the wrong IP address, directly enter the new IP address can be old cover, and finally do not forget to save.


Corp1#show running-config




Sure to connect the server’s interface F0/1


Corp1#configure terminal

Corp1(config)#access-list 100 permit tcp host host eq 80

Corp1(config)#access-list 100 deny ip any host

Corp1(config)#access-list 100 permit ip any any

Corp1(config)#interface fa0/1

Corp1(config-if)#ip access-group 100 out


Corp1#copy running-config startup-config







Correct Answer:

Corp1#conf t

Corp1(config)# access-list 128 permit tcp host host eq www

Corp1(config)# access-list 128 deny tcp any host eq www

Corp1(config)# access-list 128 permit ip any any

Corp1(config)#int fa0/1

Corp1(config-if)#ip access-group 128 out


Corp1#copy run startup-config








The output of the show frame-relay pvc command shows “PVC STATUS = INACTIVE”. What does this mean?


A.     The PVC is configured correctly and is operating normally, but no data packets have been detected for more than five minutes.

B.     The PVC is configured correctly, is operating normally, and is no longer actively seeking the address of the remote router.

C.     The PVC is configured correctly, is operating normally, and is waiting for interesting traffic to trigger a call to the remote router.

D.     The PVC is configured correctly on the local switch, but there is a problem on the remote end of the PVC.

E.      The PVC is not configured on the local switch.


Correct Answer: D




Drag and Drop



Correct Answer:






Refer to the exhibit. In the Frame Relay network, which IP addresses would be assigned to the interfaces with point-to- point




A.     DLCI 16: /24

DLCI 17: /24

DLCI 99: /24

DLCI 28: /24


B.     DLCI 16: /24

DLCI 17: /24

DLCI 99: /24

DLCI 28: /24

C.     DLCI 16: /24

DLCI 17: /24

DLCI 99: /24

DLCI 28: /24


D.     DLCI 16: /24

: /24

DLCI 99: /24

DLCI 28: /24


Correct Answer: C


Free VCE & PDF File for Cisco 200-120 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …