QUESTION 1
Which four features are provided by Cisco TelePresence Management Suite? (Choose four.)
|
A. |
Scheduling of video conference calls |
|
B. |
Built-in-bridge functionality for multiparty video conferences |
|
C. |
SIP-H.323 protocol interworking |
|
D. |
Centralized management of conference resources |
|
E. |
SMTP email event notification |
|
F. |
Endpoint configuration backup and restore |
|
G. |
Cisco TelePresence endpoint automated redundancy |
|
H. |
Automated resource optimization |
Correct Answer: ADEF
QUESTION 2
Which three features are supported by Cisco TMSPE? (Choose three.)
|
A. |
Simplified provisioning |
|
B. |
LDAP user import |
|
C. |
Scheduling via Microsoft Outlook |
|
D. |
FindMe |
|
E. |
Jabber for Windows |
|
F. |
Automatic endpoint upgrades |
Correct Answer: ABD
QUESTION 3
Management wants to modify Cisco TMS to allow users to configure the call behavior with their associated devices and dial from a single ID. Which feature needs to be enabled and configured?
|
A. |
Smart Scheduler |
|
B. |
Low-touch Provisioning |
|
C. |
FindMe |
|
D. |
CMR Provisioning |
Correct Answer: C
QUESTION 4
Which three features does Cisco VCS provide? (Choose three.)
|
A. |
native Cisco SCCP telephony integration |
|
B. |
SIP-H.323 interworking functionality |
|
C. |
native scheduling |
|
D. |
SIP trunk integration with Cisco Unified Communications Manager |
|
E. |
third-party standards-based H.323 and SIP device registration |
|
F. |
reverse proxy functionality |
Correct Answer: BDE
QUESTION 5
Refer to the exhibit. Which configuration item shown in the exhibit should be used to assign the internal and external video communication server address for this group of users?
|
A. |
User Settings > Video Address pattern |
|
B. |
Administrative Tools > User Settings |
|
C. |
Configuration Template > Edit Template |
|
D. |
User Import > Configuration |
Correct Answer: C
QUESTION 6
A Unified Communications engineer wants to configure a Cisco TelePresence SX endpoint using static IP addressing to use a different TFTP server. Which path will allow the engineer to complete this configuration?
|
A. |
Network Services > Network 1 > DHCP RequestTFTPServerAddress > Off |
|
B. |
Network > TFTP > DHCP RequestTFTPServerAddress > Off |
|
C. |
Network Services > TFTP > DHCP RequestTFTPServerAddress > Off |
|
D. |
Configuration > System Configuration > Provisioning > Set the External Manager Address |
Correct Answer: D
QUESTION 7
Which four features are supported by Cisco TelePresence Server for all hardware models in remotely managed mode? (Choose four.)
|
A. |
auto-attendant |
|
B. |
ClearPath |
|
C. |
Cluster sizes of more than 5 servers |
|
D. |
Cascading |
|
E. |
Active presence for all devices |
|
F. |
Support for Conductor |
|
G. |
Native scheduling capabilities |
Correct Answer: BDEF< /p>
QUESTION 8
Refer to the exhibit. A network engineer configures a Cisco Unified Communications Manager and VCS integration via a SIP trunk. Endpoint A is able to conduct video calls to Endpoint B.When Endpoint A attempts to share presentation content with Endpoint B, Endpoint B sees the presentation video on the main screen rather than on the presentation display. What is the cause?
|
A. |
The default MTP telephony payload is incorrect. |
|
B. |
The SIP trunk is not running on all active Cisco Unified Communications Manager nodes. |
|
C. |
MTP is not forced to be required. |
|
D. |
BFCP is not enabled. |
|
E. |
The MTP preferred codec is incorrect for content presentation. |
Correct Answer: D
QUESTION 9
A technician is tasked with performing a room readiness assessment in preparation for an immersive video endpoint. What are three Cisco best practices regarding lighting recommendations for the room? (Choose three.)
|
A. |
The bulb temperature should be between 4000 and 4100K. |
|
B. |
Key lighting should be between 200 and 400 Lux with the endpoint powered on. |
|
C. |
Shoulder lighting should not exceed two times the facial lighting values with the endpoint off. |
|
D. |
Use direct lighting fixtures. |
|
E. |
Within the camera field of view, the lighting for all parts of the room should not fluctuate more than 100 Lux. |
|
F. |
Avoid using dimming light control systems. |
Correct Answer: ACE
QUESTION 10
A network engineer wants to automate the monitoring of Cisco TelePresence TX systems. Which step should the engineer take first?
|
A. |
Configure Cisco TMS on the codec. |
|
B. |
Configure Medianet on the codec. |
|
C. |
Configure NTP on the codec. |
|
D. |
Configure Multiway on the codec. |
|
E. |
Configure SNMP on the codec. |
Correct Answer: E
Free VCE & PDF File for Cisco 210-065 Real Exam
Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …