QUESTION 81
In this item, you will need to use all information presented to you to successfully answer the question.
Refer to the exhibits. An administrator needs to perform a factory reset on a C-Series endpoint. What are two valid ways to accomplish this task? (Choose two.)
|
A. |
Exhibit A |
|
B. |
Exhibit B< /span> |
|
C. |
Exhibit C |
|
D. |
Exhibit D |
|
E. |
Exhibit E |
Correct Answer: CD
QUESTION 82
Which two methods can be used to set the default call protocol of a Cisco TelePresence endpoint running TelePresence codec firmware? (Choose two.)
|
A. |
Use the GUI and set System > H.323 > Settings > Default Call Protocol > H.323. |
|
B. |
Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323. |
|
C. |
Use the CLI command Conference Default Protocol: H323. |
|
D. |
Use the CLI command Default Protocol: H323. |
|
E. |
Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > H.323. |
Correct Answer: BE
QUESTION 83
Which video input port is available on a Cisco DX80?
|
A. |
DVI-D |
|
B. |
DVI-A |
|
C. |
VGA |
|
D. |
HDMI |
Correct Answer: D
QUESTION 84
Which three video endpoints can you set back to factory reset by using physical button presses? (Choose three.)
|
A. |
Cisco TelePresence C40 |
|
B. |
Cisco TelePresence EX90 |
|
C. |
Cisco TelePresence C60 |
|
D. |
Cisco TelePresence SX20 |
|
E. |
Cisco TelePresence EX60 |
|
F. |
Cisco TelePresence C90 |
Correct Answer: BDE
QUESTION 85
Which two layout or switching modes are supported with the Cisco TelePresence Multipoint Switch? (Choose two.)
|
A. |
enhanced continuous presence |
|
B. |
active speaker switching |
|
C. |
continuous presence |
|
D. |
speaker switching |
|
E. |
room switching |
|
F. |
active continuous presence |
Correct Answer: DE
QUESTION 86
Which three features are supported by the Cisco Video Surveillance Encoding Server? (Choose three.)
|
A. |
IP and analog cameras |
|
B. |
MPEG-2 and MPEG-4 encoding |
|
C. |
archiving |
|
D. |
motion detection |
|
E. |
clustering |
|
F. |
virtual matrix |
Correct Answer: ACD
QUESTION 87
An engineer wants to convert analog live video, streaming it across an IP network and displaying it in another location. Which two components are required, at minimum, to provide this functionality? (Choose two.)
|
A. |
Cisco Media Experience Engine 3500 |
|
B. |
Cisco TelePresence Content Server |
|
C. |
Cisco Digital Media Player |
|
D. |
Cisco Digital Media Manager |
|
E. |
Cisco Digital Media Encoder |
Correct Answer: CE
QUESTION 88
You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of 172.28.254.45. You need to check for connectivity from the Cisco Unified Communications Manager server. Which command should be entered to check for network connectivity?
|
A. |
utils network traceroute newsystem.domain254.local |
|
B. |
utils network ping 172.28.254.45 |
|
C. |
ping 172.28.254.45 |
|
D. |
traceroute 172.28.255.255 |
|
E. |
utils network host cucm.osl147.local |
Correct Answer: B
QUESTION 89
A Cisco TelePresence EX Series desktop endpoint failed to register to a Cisco VCS. The SIP status shows “Failed: 403 Forbidden” in the endpoint’s web interface. What is the first thing that should be checked in the endpoint configuration settings?
|
A. |
Verify that the correct SIP authentication credentials have been configured. |
|
B. |
Ensure that CallSetup Mode is set to Gatekeeper. |
|
C. |
Verify that Outbound Connection Credentials are properly configured. |
|
D. |
Check to see that SIP Mode is set to On. |
Correct Answer: A
QUESTION 90
When connecting to a pan-tilt-zoom camera to a C-Series codec, what type of cable must be used for camera control?
|
A. |
an Ethernet crossover cable (RJ45-to-RJ45) |
|
B. |
an Ethernet cable (RJ45-to-RJ45) |
|
C. |
a serial cable (DB25-to-DB9) |
|
D. |
a VISCA cable (DB9-to-RJ45) |
Correct Answer: D
Free VCE & PDF File for Cisco 210-065 Real Exam
Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …