Internet Control Message Protocol (ICMP)

By | June 8, 2020

ICMP (Internet Control Message Protocol) is a network layer protocol that reports errors and provides information related to IP packet processing. ICMP is used by network devices to send error messages indicating, for example, that a requested service is not available or that a host isn’t reachable.

ICMP is commonly used by network tools such as ping or traceroute. Consider the following example that illustrates how ping can be used to test the reachability of a host:

icmp ping example

Host A wants to test whether it can reach Server over the network. Host A will start the ping utility that will send ICMP Echo Request packets to Server. If Server is reachable, it will respond with ICMP Echo Reply packets. If Host A receives no response from Server, there might be a problem on the network.

ICMP messages are encapsulated in IP datagrams, which means that they don’t use higher level protocols (such as TCP or UDP) for transmission.


One other common ICMP message is the Destination unreachable message. Here is an example:

how icmp works

Host A sends a packet to Host B. Because the Host B is down, the router will send an ICMP Destination host unreachable message to Host A, informing it that the destination host is unreachable, e.g.:

ICMP destination unreachable message

Prerequisites for 200-301

200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.

The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.

Full Version 200-301 Dumps

Try 200-301 Dumps Demo