SNMP (Simple Network Management Protocol)

By | June 8, 2020

Simple Network Management Protocol (SNMP) is an application layer protocol that is used for network device management. This protocol can collects and manipulate valuable network information from switches, routers, servers, printers, and other network-attached devices.

An SNMP-managed network consists of two components:

  • Network management station (NMS) – the software which runs on the administrative computer. This software gathers SNMP data by requiring the devices on the network to disclose certain information. Devices can also inform the NMS about problems they are experiencing by sending an SNMP alert (called a trap).
  • Agent – the software which runs on managed devices and reports information via SNMP to the NMS.

 

Consider the following example:

how snmp works

The router R1 is configured to send SNMP traps to the NMS Station. If a problem occurs, the router will send an SNMP trap to Host A. For example, if there is a port security violation on R1, the router will send the SNMP trap, notifying that there has been a potential security breach on the network.

NOTE
SNMP agents use a UDP port 161, while the manager uses a UDP port 162. The current SNMP version is SNMPv3. The prior versions, SNMPv1 and SNMPv2 are considered obsolete and should not be used.

Prerequisites for 200-301

200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.

The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.

Full Version 200-301 Dumps

Try 200-301 Dumps Demo