UDP explained

By | June 8, 2020

One other important protocol in the TCP/IP site is User Datagram Protocol (UDP). This protocol is basically a scaled-down version of TCP. Just like TCP, this protocol provides delivery of data between applications running on hosts on a TCP/IP network, but, unlike TCP, it does not sequence the data and does not care about the order in which the segments arrive at the destination. Because of this it is considered to be an unreliable protocol. UDP is also considered to be a connectionless protocol, since no virtual circuit is established between two endpoints before the data transfer takes place.

Because it does not provide many features that TCP does, UDP uses much less network resources than TCP. UDP is commonly used with two types of applications:

  • applications that are tolerant of the lost data – VoIP (Voice over IP) uses UDP because if a voice packet is lost, by the time the packet would be retransmitted, too much delay would have occurred, and the voice would be unintelligible.
  • applications that have some application mechanism to recover lost data – Network File System (NFS) performs recovery with application layer code, so UDP is used as a transport-layer protocol.

 

The UDP header is 8 bytes long and consists of the following fields:

udp header

Here is a description of each field:

  • source port – the port number of the application on the host sending the data.
  • destination port – the port number of the application on the host receiving the data.
  • length – the length of the UDP header and data.
  • checksum – checksum of both the UDP header and UDP data fields.

 

NOTE
UDP is a Transport layer protocol (Layer 4 of the OSI model).

Prerequisites for 200-301

200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.

The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.

Full Version 200-301 Dumps

Try 200-301 Dumps Demo